Introduksjon
Thank you for choosing the Amazon Basics Single Outlet Hose Watering Timer. This device is designed to simplify your garden irrigation by providing flexible and automated watering schedules. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.
Produktfunksjoner
- Smart Watering Timer: Program flexible watering schedules from 1 minute to 3 hours 59 minutes for hassle-free garden irrigation.
- Intuitive kontroller: Activate manual watering with customizable duration when needed. The program can be paused for 24, 48, or 72 hours.
- Angled Screen Design: The 45% adjustable tilted screen ensures optimal visibility from any angle, displaying time, program, and battery status.
- Leak-Free Connection: Rubber gaskets ensure a tight seal and prevent water waste. Standard 1.9cm BSP thread. Operates on 2 AA alkaline batteries (not included).
Figur 1: Foran view of the Amazon Basics Single Outlet Hose Watering Timer, showing the digital display and control buttons.
Pakkeinnhold
Pakken din bør inneholde følgende varer:
- 1 x Amazon Basics Single Outlet Hose Watering Timer
- 1 x brukerhåndbok
- Rubber gaskets (pre-installed or included for leak-free connection)
Note: 2 AA alkaline batteries are required and are NOT included in the package.
Oppsett
1. Installasjon av batteri
- Finn batterirommet på baksiden av timeren.
- Åpne batteridekselet.
- Sett inn 2 nye AA alkaliske batterier, og sørg for riktig polaritet (+/-).
- Lukk batteridekselet godt for å opprettholde vanntettheten.
Figure 2: Top connection of the timer, showing the filter and threaded inlet. Ensure rubber gaskets are in place for a leak-free seal.
2. Connecting to the Faucet
- Sørg for at kranen er ren og fri for rusk.
- Check that the rubber gasket is properly seated inside the timer's inlet connector.
- Screw the timer onto your standard 1.9cm (3/4 inch) outdoor faucet by hand until it is snug. Do not overtighten.
- Koble hageslangen til uttaket på timeren.
- Slowly turn on the faucet. Check for any leaks. If leaks occur, tighten the connections slightly or adjust the rubber gaskets.
Bruksanvisning
1. Stille inn gjeldende tid
Refer to the angled screen for clear visibility of settings.
- Press the "SET" button to enter time setting mode.
- Use the "+" and "-" buttons to adjust the hour. Press "SET" to confirm.
- Use the "+" and "-" buttons to adjust the minute. Press "SET" to confirm.
2. Programming a Watering Schedule
The timer allows flexible schedules from 1 minute to 3 hours 59 minutes.
- Press the "PROG" button to enter program setting mode.
- Set the START TIME: Use "+" and "-" to adjust the hour and minute, pressing "PROG" to confirm each.
- Set the WATERING DURATION: Use "+" and "-" to adjust the duration (minutes/hours), pressing "PROG" to confirm.
- Set the WATERING FREQUENCY: Use "+" and "-" to select how often the timer should water (e.g., every 12 hours, every 24 hours, specific days). Press "PROG" to confirm.
- Once all settings are confirmed, the timer will display the next scheduled watering time.
3. Manuell vanning
To water manually outside of the programmed schedule:
- Press the "MANUAL" button.
- Use "+" and "-" buttons to set the desired manual watering duration.
- Press "MANUAL" again to start manual watering. The timer will automatically stop after the set duration.
4. Pause Function (Rain Delay)
If it rains or you don't need to water for a few days, you can pause the program:
- Trykk på «FORSINKELSE»-knappen.
- Use "+" and "-" buttons to select the pause duration (24, 48, or 72 hours).
- Press "DELAY" again to confirm. The timer will resume its programmed schedule after the delay period.
Figure 3: Visual representation of the timer's main features, including flexible schedules, manual watering, and secure sealing.
Vedlikehold
- Batteribytte: Replace batteries when the low battery indicator appears on the screen to ensure continuous operation.
- Filterrengjøring: Periodically check and clean the filter located in the inlet connector to prevent blockages and maintain water flow.
- Vinterlagring: During freezing temperatures, remove the timer from the faucet, drain any remaining water, and store it indoors to prevent damage.
- Generell rengjøring: Tørk av timeren med en myk, damp klut. Ikke bruk skurende rengjøringsmidler eller løsemidler.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Timeren vanner ikke. | Low batteries, incorrect program, faucet off, water pressure too low. | Check battery status and replace if needed. Verify program settings. Ensure faucet is fully open. Check water supply. |
| Vann lekker fra tilkoblinger. | Loose connection, damaged gasket, missing gasket. | Tighten connections. Check and replace rubber gaskets if damaged or missing. |
| Skjermen er tom eller svak. | Døde eller lave batterier. | Bytt batteriene med nye AA alkaliske batterier. |
Spesifikasjoner
- Modellnummer: AMZ622617EU
- Dimensjoner: 8.2cm x 13.7cm x 18.5cm (Length x Width x Height)
- Vekt: 383.4 g
- Trådtype: Standard 1.9cm (3/4 inch) BSP
- Strømkilde: 2 x AA alkaliske batterier (ikke inkludert)
- Vanningsvarighet: 1 minutt til 3 timer 59 minutter
- Pause funksjon: 24, 48 eller 72 timer
- Farge: Grey, Black, Blue
- Opprinnelsesland: Kina
Figur 4: Produktmål for installasjonsplanlegging.
Garanti og støtte
For garantiinformasjon og kundestøtte, se dokumentasjonen som fulgte med kjøpet ditt eller besøk den offisielle Amazon Basics-siden. webnettstedet.