WorkPro Momentum Ergonomic High-Back Active Chair User Manual

1. Introduksjon

This manual provides detailed instructions for the assembly, operation, and maintenance of your WorkPro Momentum Ergonomic High-Back Active Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

The WorkPro Momentum chair is designed to provide an exceptional seating experience, integrating precision and comfort. Key features include a premium seat cushion with 3D printed lattice mesh, an active high-back for dynamic support, multiple reclining positions, built-in lumbar support, pneumatic 1-touch height adjustment, and 3D adjustable armrests.

Image 1.1: The WorkPro Momentum Ergonomic High-Back Active Chair in a modern office environment, showcasing its design and presence.

2. Sikkerhetsinformasjon

ADVARSEL: Unnlatelse av å følge disse sikkerhetsinstruksjonene kan føre til personskade eller skade på produktet.

• Pneumatic Height Adjustment: The pneumatic height adjustment mechanism may cause injury if not used carefully. Always follow manufacturer's instructions for safe use. Avoid sudden movements when adjusting height.
• Forsamling: Ensure all components are securely fastened before use. Periodically check all screws and bolts to ensure they remain tight.
• Vekt kapasitet: This chair supports up to 275 lbs (124.7 kg). Do not exceed this weight limit.
• Tiltenkt bruk: This chair is designed for indoor office and home office use. Do not use for purposes other than its intended design.
• Barn: Keep children away from the chair during assembly. Do not allow children to play on or with the chair.
• Stabilitet: Do not stand on the chair. Avoid leaning excessively to one side or backward, which could cause the chair to tip.

3. Pakkens innhold

Før monteringen starter, må du kontrollere at alle deler er til stede og uskadet. Hvis noen deler mangler eller er skadet, må du ikke fortsette monteringen. Kontakt kundestøtte umiddelbart.

• Rygg
• Seteputemontering
• Armlener (venstre og høyre)
• Chair Base (Star Base)
• Hjul (5 stk.)
• Gassløftesylinder
• Maskinvarepakke (skruer, skiver, unbrakonøkkel)

4. Oppsett og montering

Assembly is required for this product. Please follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratching.

1. Fest hjulene til basen: Insert each of the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
2. Sett inn gassløft: Place the gas lift cylinder into the center hole of the assembled chair base. Ensure it sits securely.
3. Fest armlenene til setet: Align the armrests with the pre-drilled holes on the underside of the seat cushion assembly. Secure them using the provided screws and Allen wrench. Do not overtighten initially.
4. Fest ryggstøtten til setet: Connect the backrest to the seat cushion assembly using the designated mounting points and hardware. Ensure proper alignment before tightening all screws.
5. Koble seteenheten til gassløfteren: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center mechanism hole aligns with the top of the gas lift. Press down firmly to secure.
6. Sluttsjekk: Once assembled, sit on the chair to ensure all components are properly seated and stable. Test all adjustment functions.

Image 4.1: Detailed product dimensions and weight capacity (275 lbs) of the WorkPro Momentum Ergonomic High-Back Active Chair.

5. Bruksanvisning

Your WorkPro Momentum chair offers several adjustment features to customize your seating experience for optimal comfort and ergonomic support.

5.1. Justering av setehøyde

To adjust the seat height, locate the pneumatic 1-touch lever typically found on the right side beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at your desired height.

5.2. Reclining Positions

The chair features multiple reclining positions. Use the recline tension knob (usually located under the front of the seat) to adjust the resistance of the recline. A separate lever (often on the left side) may be used to lock the backrest in a specific reclined position or allow for free-flowing tilt.

Image 5.1: The WorkPro Momentum chair illustrating its capability for multiple reclining positions, allowing users to find their optimal comfort angle.

5.3. Active High-Back Support

The active high-back is designed to move harmoniously with your body, providing continuous support and promoting healthy posture throughout the day. This dynamic movement helps reduce static pressure and encourages micro-movements.

Bilde 5.2: En bakside view of the WorkPro Momentum chair demonstrating the active movement of its high-back, adapting to the user's posture.

5.4. Korsryggstøtte

The chair features built-in lumbar support that cradles your lower back, ensuring proper spinal alignment and reducing strain. This support is integrated into the backrest design.

5.5. 3D Armrest Adjustment

The 3D armrests offer customizable support with three adjustment capabilities:

• Høydejustering: Press the button on the side of the armrest and move it up or down to your desired height.
• Pivot: Rotate the armrest pads inward or outward to support your arms during various tasks.
• Forward & Backward Movement: Slide the armrest pads forward or backward to find the optimal position for your forearms.

5.6. Premium Seat Cushion

The premium seat cushion design incorporates a 3D printed lattice mesh structure combined with foam layers. This construction ensures long-lasting comfort and maintains its shape and performance over time.

Bilde 5.3: En eksplodert view illustrating the multi-layered construction of the WorkPro Momentum chair's premium seat cushion, including the 3D printed lattice mesh.

6. Vedlikehold

Regular maintenance will help prolong the life and appearance of your WorkPro Momentum chair.

• Cleaning Vegan Leather: For general cleaning, wipe the vegan leather upholstery with a soft, damp klut. For vanskeligere flekker, bruk en mild såpeløsning og tørk av umiddelbart. Unngå sterke kjemikalier eller slipende rengjøringsmidler.
• Maskinvaresjekk: Periodically inspect all screws, bolts, and connections to ensure they are tight. Retighten as necessary to maintain stability and safety.
• Vedlikehold av hjul: Keep casters free of hair, dust, and debris to ensure smooth movement. You may occasionally clean the caster wheels with a damp klut.
• Gassheis: The gas lift is a sealed unit and requires no user maintenance. If it fails to function, contact customer support.

7. Feilsøking

Hvis du støter på problemer med stolen din, kan du se følgende vanlige problemer og løsninger:

8. Spesifikasjoner

9. Garanti og støtte

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty terms and conditions may vary.

If you require further assistance, have questions about assembly, operation, or need to report a missing/damaged part, please contact the manufacturer or your point of purchase. The manufacturer of this product is OFFICE DEPOT.

You can often find support resources, FAQs, and contact information on the official WorkPro website or through the retailer where you purchased the chair.

WorkPro Store: Visit the WorkPro Store on Amazon