MLOVE E90 Bluetooth Speaker User Manual

Introduksjon

Thank you for choosing the MLOVE E90 Bluetooth Speaker. This manual provides detailed instructions for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product and retain it for future reference.

Produkt overview

Hva er i esken

• MLOVE E90 Bluetooth Speaker
• USB-C ladekabel
• Skulderstropp
• Hurtigstartguide

Nøkkelfunksjoner

• 80W kraftig stereolyd: Delivers robust audio output for an immersive listening experience.
• Dynamisk RGB-belysning: Features customizable RGB lights that sync with music, enhancing the ambiance.
• IP65 støvtett og vanntett: Designed for outdoor use, resistant to dust and water splashes.
• True Wireless Stereo (TWS) funksjon: Allows pairing two E90 speakers for enhanced stereo sound.
• Flere avspillingsmoduser: Supports Bluetooth, AUX-in, USB drive, and MicroSD card playback.
• Lang batterilevetid: Equipped with a large capacity battery for extended playtime.
• Bærbar design: Includes a shoulder strap for easy transport.

Image: Internal components of the MLOVE E90 speaker, highlighting its 80W peak power output, 5-unit acoustic configuration, including two 33mm dome tweeters, two 111mm bass radiators, and a 90x120mm oval mid-bass driver.

Image: The MLOVE E90 speaker illustrating its powerful battery life, emphasizing its large capacity and Type-C quick charge capability for uninterrupted listening.

Image: The MLOVE E90 speaker shown with water splashing around it, highlighting its IP65 dustproof and waterproof rating, making it suitable for various outdoor environments and temperatures from -10°C to 45°C.

Oppsettveiledning

1. Lading av høyttaleren

1. Locate the USB-C charging port, usually protected by a rubber flap on the back or side of the speaker.
2. Connect the provided USB-C cable to the speaker's charging port.
3. Koble den andre enden av USB-C-kabelen til en kompatibel USB-strømadapter (ikke inkludert) eller en datamaskins USB-port.
4. The charging indicator lights will illuminate, typically showing charging progress. A full charge may take approximately 4.5 hours with a 3A charger.
5. Once fully charged, disconnect the charging cable and ensure the rubber flap is securely closed to maintain water resistance.

2. Slå på/av

• For å slå på: Press and hold the Power button for a few seconds until you hear an audible prompt or see the indicator lights activate.
• Slik slår du av: Trykk og hold inne av/på-knappen igjen i noen sekunder til du hører en lydmelding eller indikatorlampene slukkes.

3. Bluetooth-paring

1. Sørg for at høyttaleren er slått på og i Bluetooth-paringsmodus. Bluetooth-indikatorlampen vil vanligvis blinke.
2. Aktiver Bluetooth på enheten din (smarttelefon, nettbrett, datamaskin) og søk etter tilgjengelige enheter.
3. Select "MLOVE E90" from the list of found devices.
4. Once paired, the speaker will emit an audible confirmation, and the Bluetooth indicator light will become solid.
5. The speaker supports Bluetooth 5.4 for stable and efficient connection.

Image: The MLOVE E90 speaker demonstrating its ability to connect to two devices simultaneously (e.g., a smartphone and a tablet) with seamless switching, utilizing Bluetooth 5.4 for stable playback.

4. Ekte trådløs stereo (TWS)-paring

To achieve a true stereo sound experience, you can pair two MLOVE E90 speakers together.

1. Ensure both MLOVE E90 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), press the TWS button (refer to your Quick Start Guide for button location). The TWS indicator light will flash.
3. Primærhøyttaleren vil automatisk søke etter sekundærhøyttaleren.
4. Once connected, both speakers will emit an audible confirmation, and the TWS indicator lights will become solid.
5. Now, connect your device to the primary speaker via Bluetooth as described in step 3. Audio will play in stereo through both speakers.

Image: Two MLOVE E90 speakers shown wirelessly connected, demonstrating the True Wireless Stereo (TWS) function which allows them to play audio in synchronized stereo for an enhanced listening experience.

Bruksanvisning

Grunnleggende kontroller

• Strømknapp: Trykk og hold for å slå på/av.
• Spill av/pause-knapp: Trykk én gang for å spille av eller sette musikk på pause.
• Volum opp (+): Press once to increase volume. Press and hold to skip to the next track.
• Volum ned (-): Press once to decrease volume. Press and hold to skip to the previous track.
• Modusknapp (M): Press to switch between playback modes (Bluetooth, AUX, USB, MicroSD).
• Lysknapp: Press to cycle through RGB light modes. Press and hold to turn lights off/on.
• Bass Boost-knapp: Press to activate/deactivate enhanced bass.

RGB-lysmoduser

The MLOVE E90 features dynamic RGB lighting with 16.8 million colors. Use the Light button to cycle through various modes, including beat-sync and dynamic flowing light effects. Press and hold the Light button to turn the lights off or on.

Image: The MLOVE E90 speaker displaying its dynamic RGB and strobe lights in an outdoor party setting, illustrating features like 16.8 million colors, aircraft strobe light effects, beat synchronization, and dynamic flowing light patterns.

Flere avspillingsmoduser

The speaker supports various audio input methods:

• Bluetooth 5.4: Trådløs tilkobling til kompatible enheter.
• AUX-inngang: Connect external audio devices using a 3.5mm audio cable (not included).
• USB Playing: Sett inn en USB-flash-stasjon med lyd files (WAV, WMA, MP3 formats supported).
• MicroSD Card Playing: Insert a MicroSD card with audio files (WAV, WMA, MP3 formats supported).

Use the Mode button to switch between these input sources. The speaker will automatically detect and switch to an inserted USB drive or MicroSD card.

Image: The MLOVE E90 speaker displaying its connectivity panel with ports for USB-C charging, USB-A for playing music from a USB drive and power bank functionality, and a 3.5mm AUX-in port, alongside icons for Bluetooth 5.4, AUX-in, USB Playing, and Lossless Music Playing.

Vedlikehold

Rengjøring

• Tørk av høyttaleren med en myk, damp klut.
• Ikke bruk slipende rengjøringsmidler, alkohol eller kjemiske løsemidler, da disse kan skade overflaten.
• Ensure all port covers are securely closed before cleaning with a damp klut.

Vannmotstand (IP65)

• The MLOVE E90 is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction.
• This speaker is suitable for use in light rain or near water, but it should not be submerged in water.
• Always ensure the rubber flap covering the charging and input ports is securely closed to maintain water resistance.
• Do not expose the speaker to saltwater or other corrosive liquids. If exposed, rinse with fresh water and dry thoroughly.

Lagring

• Oppbevar høyttaleren på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
• Hvis du oppbevarer batteriet over lengre tid, bør du lade det til omtrent 50 % med noen få måneders mellomrom for å bevare batteriets helse.

Feilsøking

Spesifikasjoner

Garanti og støtte

The MLOVE E90 Bluetooth Speaker comes with a 2 års begrenset produsentgaranti fra kjøpsdatoen. Denne garantien dekker produksjonsfeil og utførelse ved normal bruk.

Garantien dekker ikke skader forårsaket av feilbruk, ulykker, uautoriserte modifikasjoner eller normal slitasje. Vennligst ta vare på kjøpsbeviset for garantikrav.

Kundestøtte

For technical assistance, warranty claims, or any questions regarding your MLOVE E90 speaker, please contact our customer support team. Refer to the contact information provided in your Quick Start Guide or on the official MLOVE webnettstedet.

Merk: Spesifikke kontaktdetaljer kan variere fra region til region.