Baseus BS1 NC Semi-in-Ear støydempende ørepropper brukerhåndbok

1. Produktet er overview

The Baseus BS1 NC Semi-in-Ear Noise Cancelling Earbuds offer a blend of comfort and advanced audio technology. Featuring Adaptive Hybrid Active Noise Cancellation (ANC), Hi-Res Audio with LDAC support, and a lightweight design, these earbuds are engineered for extended listening and clear communication. They are also equipped with a 6-microphone AI system for clear calls and IP55 water and dust resistance.

Image: Baseus BS1 NC Semi-in-Ear Noise Cancelling Earbuds and their charging case in black.

2. Pakkens innhold

Sørg for at alle varene er til stede i pakken:

• Baseus Bass BS1 NC Semi-in-Ear Earbuds (Left and Right)
• Ladeetui
• USB-C ladekabel
• Hurtigstartguide

Image: The complete retail package for the Baseus BS1 NC Earbuds, showing the earbuds, charging case, USB-C cable, and quick start guide.

3. Lade øreproppene og etuiet

For optimal performance, fully charge the earbuds and charging case before first use.

3.1 Lader ørepluggene

1. Plasser øreproppene i ladeetuiet. Sørg for at de er riktig plassert i de respektive sporene (V for venstre, H for høyre).
2. Close the charging case. The earbuds will begin charging automatically.

3.2 Lade etuiet

1. Connect the provided USB-C charging cable to the charging port on the case.
2. Koble den andre enden av kabelen til en USB-strømadapter (ikke inkludert) eller en datamaskins USB-port.
3. The LED indicator on the case will show the charging status:
   • Grønn: 75 %–100 % belastet
   • Gul: 25 %–75 % belastet
   • Rød: Below 25% charged
4. A full charge for the case provides up to 40 hours of total playtime for the earbuds (with ANC off). A 10-minute charge can provide up to 2 hours of playback.

Image: The Baseus BS1 NC Earbuds resting in their open charging case, highlighting the 40-hour total playtime and rapid charging capabilities.

4. Sammenkobling og tilkobling

4.1 Første paring

1. Åpne ladeetuiet. Øreproppene vil automatisk gå inn i paringsmodus.
2. Aktiver Bluetooth på enheten din (smarttelefon, nettbrett, datamaskin).
3. Søk etter "Baseus Bass BS1 NC" in the list of available Bluetooth devices.
4. Select "Baseus Bass BS1 NC" to connect. A voice prompt will confirm successful pairing.

4.2 Automatisk gjentilkobling

Once paired, the earbuds will automatically reconnect to the last connected device when removed from the charging case and within Bluetooth range.

4.3 Flerpunktstilkobling

The Baseus BS1 NC supports Baseus Smart-Connect (BSC) technology, allowing simultaneous connection to two devices. This enables seamless switching between audio sources without manual re-pairing.

Slik bruker du flerpunktstilkobling:

1. Koble øreproppene til den første enheten din.
2. Koble øreproppene fra Bluetooth-innstillingene til den første enheten (ikke opphev paringen).
3. Koble øreproppene sammen med den andre enheten din.
4. Koble øreproppene til den første enheten på nytt fra Bluetooth-innstillingene. Øreproppene skal nå være koblet til begge enhetene.

Lyden vil automatisk bytte til enheten som spiller av innhold eller mottar et anrop.

Image: A visual representation of the Baseus BS1 NC Earbuds connected to both a laptop and a smartphone, showcasing the instant multipoint connection feature.

5. Bruk av øreproppene

The Baseus BS1 NC earbuds feature a semi-in-ear design for comfortable, pressure-free wear. For optimal sound quality and noise cancellation, ensure a proper fit.

1. Identifiser venstre (L) og høyre (R) øreplugger.
2. Før forsiktig hver ørepropp inn i øregangen.
3. Adjust the earbud until it feels secure and comfortable. The stem should point slightly forward or downward.

Image: A person wearing the Baseus BS1 NC Earbuds, illustrating their ergonomic and lightweight design for all-day comfort.

6. Bruksanvisning

6.1 Berøringskontroller

The earbuds feature intuitive touch controls on their stems. The following are default functions, which may be customizable via the Baseus app:

Image: An illustration detailing the intuitive touch controls on the Baseus BS1 NC Earbuds for various functions like play/pause, call management, noise reduction, and voice assistant activation.

6.2 Støykontrollmoduser

The Baseus BS1 NC earbuds offer three noise control modes:

• Adaptive Hybrid ANC (Active Noise Cancellation): Reduces ambient noise for an immersive listening experience. Ideal for noisy environments.
• Gjennomsiktighetsmodus: Allows you to hear your surroundings while still enjoying your audio. Useful for awareness in urban settings or conversations.
• Normal modus: Standard lydavspilling uten aktiv støydemping eller gjennomsiktighetsfunksjoner.

Switch between modes by pressing and holding the touch area on either earbud for 2 seconds.

Image: A cutaway diagram of a Baseus BS1 NC earbud in an ear, illustrating the semi-in-ear fit and the availability of Adaptive Noise Cancelling and Transparency Mode.

6.3 Hi-Res Audio with LDAC

These earbuds support LDAC technology, enabling high-resolution audio transmission for a detailed and rich sound experience. Ensure your device supports LDAC and activate it in your device's Bluetooth settings for the best audio quality.

Image: The Baseus BS1 NC Earbuds surrounded by sound waves, emphasizing features like Hi-Res Audio, SuperBass 2.0, and 13mm dynamic drivers for powerful sound.

6.4 6-Mic AI Clear Calls

The earbuds are equipped with 6 microphones and AI noise isolation technology to ensure your voice is clear during calls, even in noisy environments. Wind noise reduction further enhances call clarity outdoors.

Image: A detailed diagram of the Baseus BS1 NC earbud, highlighting the placement of the FF-Mic, FB-Mic, and Talk-Mic, which contribute to the 6-Mic AI Clear Call technology and wind-noise blocking design.

6.5 Smart appkontroll

Download the dedicated Baseus app for enhanced control and customization options. The app allows you to:

• Adjust Bass Boost levels.
• Select from various EQ Modes.
• Control Spatial Acoustics settings.
• Use the "Find Your Earbuds" feature.

Note: In guest mode, no account creation or permissions are required to customize features, but GPS access is needed to locate lost earbuds.

Image: A smartphone displaying the Baseus app interface, which offers various sound control options including Bass Boost, EQ Modes, Spatial Acoustics, and a "Find Your Earbuds" function.

7. Vedlikehold og stell

7.1 Rengjøring

• Rengjør øreproppene og ladeetuiet regelmessig med en myk, tørr og lofri klut.
• Ikke bruk sterke kjemikalier, rengjøringsmidler eller sterke rengjøringsmidler.
• Gently remove any earwax or debris from the earbud mesh and charging contacts using a small, soft brush or cotton swab.

7.2 Vann- og støvmotstand (IP55)

The earbuds are rated IP55, meaning they are protected against limited dust ingress and low-pressure water jets from any direction. This makes them suitable for workouts and light rain exposure.

• Ikke senk øreproppene i vann.
• Sørg for at øreproppene er tørre før du setter dem tilbake i ladeetuiet for å unngå skade på ladekontaktene.
• Ladevesken er ikke vanntett.

Image: The Baseus BS1 NC Earbuds shown with water droplets, signifying their IP55 rating for dust and water resistance.

7.3 Oppbevaring

Oppbevar øreproppene i ladevesken når de ikke er i bruk for å beskytte dem og holde dem ladet.

8. Feilsøking

If you encounter issues with your Baseus BS1 NC earbuds, refer to the following common solutions:

• Ingen lyd-/tilkoblingsproblemer:
  • Sørg for at øreproppene er ladet.
  • Verify Bluetooth is enabled on your device and "Baseus Bass BS1 NC" is selected.
  • Try placing earbuds back in the case, closing it, and then reopening to reset the connection.
  • Glem enheten i Bluetooth-innstillingene dine og par den på nytt.
• Én øreplugg fungerer ikke:
  • Sørg for at begge øreproppene er ladet.
  • Sett begge øreproppene tilbake i etuiet, lukk dem og åpne dem igjen.
  • Rengjør ladekontaktene på begge øreproppene og inni etuiet.
• Dårlig lydkvalitet:
  • Sørg for at øreproppene sitter ordentlig i ørene.
  • Rengjør øreproppenes netting for å fjerne eventuelle blokkeringer.
  • Check your device's audio settings and ensure LDAC is enabled if supported.
• ANC ikke effektivt:
  • Ensure ANC mode is activated via touch control or the Baseus app.
  • Adjust the earbuds for a better seal in your ears.

9. Spesifikasjoner

10. Offisiell produktvideo

Watch the official product video for a visual guide on the Baseus BS1 NC Earbuds:

11. Garanti og støtte

For warranty information, technical support, FAQs, and further assistance, please visit the official Baseus support center.

Refer to the Quick Start Guide included in your package for a direct link or visit the Baseus webnettstedet.

Note: Protection plans may be available for purchase separately.