WAVLINK 10G PCIe Network Card User Manual

1. Sikkerhetsinformasjon

Please read all instructions carefully before installing or operating the WAVLINK 10G PCIe Network Card. Retain this manual for future reference.

• Always power off your computer and disconnect it from the power source before opening the case or installing any internal components.
• Discharge any static electricity from your body by touching a grounded metal object (e.g., the computer chassis) before handling the network card.
• Handle the network card by its edges to avoid touching the gold contacts or components.
• Ensure proper ventilation inside your computer case to prevent overheating.
• Viktig: Remove the protective plastic film from the PCI-e interface before connecting the card to the PC's PCI-e slot.

2. Pakkens innhold

Bekreft at alle varene er til stede i pakken din:

• WAVLINK 10G PCIe Network Card (Model: WL-NWP004-10G)
• Standard Profile Bracket (pre-installed)
• Lav Profile Brakett
• Monteringsskruer
• USB-minnepinne (inneholder drivere)
• Hurtiginstallasjonsveiledning

Image: Contents of the WAVLINK 10G PCIe Network Card package, including the card, brackets, screws, and USB drive.

3. Produktet er overview

The WAVLINK 10G PCIe Network Card is designed to provide high-speed network connectivity for desktop computers. It features the AQC113 controller for reliable performance and supports multiple speed options.

Nøkkelfunksjoner:

• 10G High-Speed Transmission: Achieves network speeds up to 10 times faster than traditional gigabit rates, supporting 10000/5000/2500Mbps.
• PCIe-kompatibilitet: Compatible with PCIe x4, x8, and x16 slots. Note: Not compatible with PCI slots.
• Operativsystemstøtte: Seamless compatibility with Windows 11, Windows 10, and Linux operating systems.
• Flexible Bracket Versatility: Inkluderer både standard og lavprofile brackets for installation in various computer case sizes.
• Robust Metal Shielding & Heat Sink: Minimizes electromagnetic interference and provides excellent heat dissipation for stable network transmission.
• Thickened Gold Finger: Ensures stable and reliable connection to the PCIe slot.

Komponentidentifikasjon:

Image: The WAVLINK 10G PCIe Network Card highlighting the AQC113C-B1 controller for stable transmission.

• PCIe-grensesnitt: Connects to the motherboard's PCIe slot.
• RJ45 Ethernet-port: Connects to your network cable.
• AQC113C-B1 Controller: The main chip responsible for network processing.
• Varmeavleder: Dissipates heat from the controller for optimal performance.
• Gold Finger: The gold-plated contacts that interface with the PCIe slot.

Image: The WAVLINK 10G PCIe Network Card showing both standard and low-profile parentes.

4. Setup: Physical Installation

Follow these steps to physically install the WAVLINK 10G PCIe Network Card into your computer:

1. Power Off and Open PC Case:

   Completely power off your computer and disconnect all cables. Open the computer case to access the motherboard.

   

   Image: Illustration of powering off a PC and opening its side panel to reveal internal components.
2. Identify an Available PCIe Slot:

   Locate an available PCIe x4, x8, or x16 slot on your motherboard. Ensure it is clear of obstructions.

   

   Image: Diagram showing compatible PCIe x4, x8, and x16 slots on a motherboard.

3. Fjern spordekselet:

   Unscrew and remove the metal slot cover corresponding to the chosen PCIe slot from the back of your computer case.

   

   Image: Illustration of inserting the PCIe network card into an available slot on the motherboard.

4. Installer nettverkskortet:

   Carefully align the network card with the PCIe slot and press it firmly until it is fully seated. Ensure the bracket aligns with the opening in the case.

   

   Image: Illustration of securing the network card with screws and connecting an Ethernet cable to its RJ45 port.
5. Sikre kortet:

   Use the screw removed earlier to secure the network card's bracket to the computer case.

6. Lukk saken og koble til på nytt:

   Close the computer case, reconnect all cables, and power on your PC.

5. Bruksanvisning

Driverinstallasjon:

Etter den fysiske installasjonen må du installere de riktige driverne for at nettverkskortet skal fungere som det skal.

1. Using the Included USB Flash Drive:

   Insert the provided USB flash drive into an available USB port on your computer. Navigate to the drive and run the driver installation executable. Follow the on-screen prompts to complete the installation.

   

   Image: A USB flash drive, typically included for driver installation.
2. Laste ned drivere på nett:

   Alternatively, you can download the latest drivers from the official WAVLINK webnettstedet. Besøk www.wavlink.com, navigate to the support section, and search for model WL-NWP004-10G. Download and install the drivers according to the instructions provided on the webnettstedet.

3. Bekreftelse:

   After installation, check Device Manager (Windows) or network settings (Linux) to ensure the network card is recognized and functioning correctly.

Network Cable Requirements:

To achieve optimal performance, use appropriate Ethernet cables:

• For 10Gbps speeds, a Cat6A or higher Ethernet cable is recommended.
• Cat5E and Cat6 cables can support lower speeds (2.5G/5G) but may not consistently achieve 10Gbps over longer distances.

Image: Chart detailing recommended Ethernet cable types for 2.5G, 5G, and 10G network speeds.

Advanced Network Configuration (Optional):

• Jumborammer: For maximum throughput, especially with large file transfers, enable Jumbo Frames (e.g., 9K MTU) on your network card, router, and other network devices. Ensure consistent settings across all devices.
• Full dupleks: The card supports full duplex operation. In most cases, leaving this setting on "Auto" is sufficient. If manual configuration is required, set it to "10Gbps Full Duplex".

6. Vedlikehold

Proper maintenance ensures the longevity and optimal performance of your network card:

• Hold rent: Periodically clean your computer's interior to prevent dust buildup on the network card and its heat sink. Dust can impede heat dissipation.
• Luftstrøm: Ensure good airflow within your PC case. The card's excellent heat sink helps manage temperature, but proper case ventilation is crucial.
• Driveroppdateringer: Sjekk WAVLINK regelmessig webnettsted for oppdaterte drivere for å sikre kompatibilitet og forbedringer av ytelse.

Image: Close-up of the WAVLINK 10G PCIe Network Card's heat sink, designed for efficient heat dissipation.

7. Feilsøking

If you encounter issues with your WAVLINK 10G PCIe Network Card, refer to the following common solutions:

• No Network Connection / Card Not Detected:
  • Sørg for at kortet er helt på plass i PCIe-sporet.
  • Kontroller at de riktige driverne er installert. Installer driverne på nytt om nødvendig.
  • Check the network cable connection to both the card and your router/switch.
  • Prøv et annet PCIe-spor hvis tilgjengelig.
• Lave nettverkshastigheter:
  • Confirm you are using a Cat6A or higher Ethernet cable for 10Gbps.
  • Check if Jumbo Frames are enabled and consistently configured across all network devices (card, switch, router).
  • Ensure your router/switch supports 10Gbps speeds.
  • Update network card drivers to the latest version.
• Driver Installation Warnings (e.g., Antivirus Flags):

  Some antivirus software may flag driver installation files as suspicious. If you encounter such warnings, download the drivers directly from the official WAVLINK webnettstedet (www.wavlink.com) to ensure authenticity. Temporarily disable antivirus during installation if confident in the source, then re-enable immediately.

• Intermitterende tilkobling:
  • Se etter løse koblinger.
  • Ensure the card is not overheating; verify proper case ventilation.
  • Test med en annen Ethernet-kabel.

8. Spesifikasjoner

9. Garanti og støtte

Garantiinformasjon:

The WAVLINK 10G PCIe Network Card comes with a 1 års garanti from the date of purchase. This warranty covers manufacturing defects and ensures product reliability. Please retain your proof of purchase for warranty claims.

Kundestøtte:

For technical assistance, troubleshooting, or warranty inquiries, please contact WAVLINK customer support:

• E-post: support@wavlink.com
• Live Chat Support: Besøk www.wavlink.com (Mon-Fri 08:30 am - 5:30 pm UTC+8)
• Telefon (lokal i USA): +1(888)973-0883 (man-fre 09:00–10:00 UTC-5)

Image: WAVLINK customer support contact details.