STAPLES Hyken Pro Ergonomic Office Chair

1. Produktet er overview

The STAPLES Hyken Pro Ergonomic Office Chair is designed to provide comfort and support for extended periods of sitting. It features a breathable mesh back and seat, adjustable lumbar support, a three-position tilt lock, and a swivel base for enhanced mobility. This chair is built to meet or exceed ANSI/BIFMA quality standards and supports individuals up to 275 lbs.

Figur 1: Foran view of the STAPLES Hyken Pro Ergonomic Office Chair.

2. Sikkerhetsinformasjon

This chair meets or exceeds ANSI/BIFMA safety standards. To ensure safe operation and prevent injury:

• Always ensure the chair is properly assembled before use.
• Ikke overskrid den anbefalte maksimale vekten på 275 lbs.
• Unngå å stå på stolen eller bruke den som en krakk.
• Hold barn og kjæledyr unna stolen under montering og justering.
• Regularly inspect all components for wear or damage. Discontinue use if any damage is found.

3. Oppsett og montering

While some components may be pre-assembled, final assembly is required. Please follow these general steps. Refer to the detailed assembly instructions included in your product packaging for specific diagrams and hardware.

1. Pakk ut komponenter: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all parts are present against the included parts list.
2. Fest hjulene til basen: Insert the casters into the holes at the end of each leg of the 5-star base until they click securely into place.
3. Installer gassløft: Place the gas lift cylinder into the center hole of the 5-star base.
4. Montering av sete og ryggstøtte: Attach the seat mechanism to the bottom of the seat cushion. Then, connect the backrest to the seat mechanism using the provided screws and tools.
5. Fest armlener: Secure the armrests to the seat assembly. Ensure they are firmly attached.
6. Mount Headrest: Attach the adjustable headrest to the top of the backrest.
7. Sluttsamling: Place the assembled seat and backrest onto the gas lift cylinder. Press down firmly to secure.

Figure 2: Chair dimensions for reference during assembly and placement.

4. Bruksanvisning

The Hyken Pro chair offers multiple adjustment options to customize your seating experience:

• Setehøydejustering: Locate the lever under the right side of the seat. Pull the lever up to raise the seat. While seated, pull the lever up to lower the seat. Release the lever to lock the height.
• Justering av armlenet: The armrests are 3-way adjustable. Press the button on the side of the armrest support to adjust their height. They can also pivot and slide forward/backward.
• Tilt Lock and Tension:
  • Vippelås: Use the lever on the left side of the seat to lock the backrest in one of three reclining positions.
  • Tilt spenning: Rotate the knob located under the front of the seat to adjust the resistance of the recline function. Turn clockwise for more resistance, counter-clockwise for less.
• Justering av korsryggstøtte: The integrated lumbar support can be adjusted vertically to fit the curve of your lower back. Gently push or pull the lumbar support pad to your desired position.
• Justering av nakkestøtte: The 3-way pivoting headrest can be adjusted for height and angle to provide optimal neck and head support.

Figur 3: Overview of the chair's 14 adjustment options for a customized fit.

5. Vedlikehold og stell

Proper maintenance will extend the life and appearance of your STAPLES Hyken Pro chair:

• Cleaning Mesh Fabric: Bruk en myk klut dampened with mild soap and water to gently wipe down the mesh back and seat. Avoid abrasive cleaners or harsh chemicals. Allow to air dry completely.
• Cleaning Plastic and Metal Parts: Tørk av med en myk, damp cloth. For stubborn dirt, a mild, non-abrasive cleaner can be used.
• Hjulpleie: Periodically check casters for accumulated hair or debris and clean as needed to ensure smooth movement.
• Maskinvaresjekk: Every six months, check all screws and bolts to ensure they are tight. Re-tighten if necessary.
• Unngå direkte sollys: Prolonged exposure to direct sunlight can cause the mesh and plastic components to fade or degrade.

6. Feilsøking

Hvis du støter på problemer med stolen din, kan du se følgende vanlige løsninger:

7. Spesifikasjoner

• Modellnavn: Hyken Pro
• Varemodellnummer: ST63228
• Merke: STAPLER
• Farge: Svart
• Materiale: Mesh (Fabric Type), Foam (Fill Material)
• Produktdimensjoner: 44" - 56.3" H x 28.5" W x 27.8" D (Overall)
• Setedybde: 17.9 tommer
• Bakstilen: Mesh
• Spesialfunksjon: Justerbar nakkestøtte
• Maksimal vekt Anbefaling: 275 pund
• Antall liggestillinger: 3
• Varevekt: 27.2 pund
• Sikkerhetsstandarder: Meets or exceeds ANSI/BIFMA quality standards

Figure 4: The chair is designed to support users up to 275 lbs.

8. Garanti og støtte

For information regarding warranty coverage, returns, or customer support, please refer to the following:

• Returnerer: This product typically includes a 30-day easy return policy. Please check your purchase documentation for specific details.
• Kundestøtte: For assistance with your STAPLES Hyken Pro chair, please contact STAPLES customer service. Contact information can usually be found on the STAPLES official webnettstedet eller kjøpskvitteringen din.
• Beskyttelsesplaner: Optional 2-Year or 3-Year Protection Plans may be available for purchase separately.

For further details, visit the STAPLES Store on Amazon.