GOOLOO A5 and A3 Jump Starter with Air Compressor Instruction Manual

1. Produktet er overview

The GOOLOO A5 and A3 Jump Starter with Air Compressor are versatile 4-in-1 devices designed for automotive emergencies and daily convenience. They combine a powerful jump starter, a high-capacity tire inflator, a robust power bank, and a bright LED light into a single, portable unit. These devices are engineered for reliability and ease of use in various conditions.

2. Sikkerhetsinformasjon

Your GOOLOO Jump Starter is equipped with 10 smart safety protections to ensure safe operation. Always read and understand all safety instructions before use.

• Overladingsbeskyttelse: Forhindrer batteriskader fra overlading.
• Overstrømsbeskyttelse: Beskytter mot for høy strømflyt.
• Kortslutningsbeskyttelse: Slår seg automatisk av ved kortslutning.
• Omvendt polaritetsbeskyttelse: Alerts and prevents damage from incorrect clamp forbindelse.
• Beskyttelse av AI-programvare: Intelligent software monitors and manages device performance.
• High and Low Temperature Protection: Operates safely within a wide temperature range (-4°F to 140°F).
• Spark-Proof Protection: Utviklet for å forhindre gnister under tilkobling.
• Over-voltage Beskyttelse: Beskytter mot volumtage overspenninger.
• Overbelastningsbeskyttelse: Prevents damage from excessive load.
• Beskyttelse mot omvendt lading: Prevents current from flowing back into the jump starter.

Generelle sikkerhetsforholdsregler:

• Ikke senk enheten i vann.
• Ikke demonter enheten.
• Oppbevares utilgjengelig for barn.
• Use only specified accessories and chargers.

3. Pakkens innhold

Sørg for at alle varene er til stede ved utpakking:

• GOOLOO A5/A3 Jump Starter Unit
• Smarte startkabler
• Luftslange
• Diverse dyseadaptere (for baller, sykler osv.)
• USB-C ladekabel
• Bæreveske
• Brukerhåndbok

4. Produktfunksjoner

4.1. Jump Starter Function

The GOOLOO A5 delivers up to 4000A peak current, capable of restarting most 12V vehicles (up to all gas / 10.0L diesel engines). The A3 model provides 3000A peak current for up to all gas / 9.0L diesel engines. Both models feature a BOOST function for deeply discharged or near-dead batteries. Operating temperature range is -4°F to 140°F.

Image: The GOOLOO A5 Jump Starter connected to a car battery, demonstrating the jump-starting capability. The unit displays battery status and current readings.

4.2. Tire Inflator Function

Equipped with a high-efficiency motor, the A5 can inflate tires up to 160 PSI, featuring a 25mm cylinder for faster inflation. The A3 inflates up to 150 PSI. It can inflate a 285/70 R17 pickup tire from 30 PSI to 36 PSI in approximately 2 minutes (A5), or a 195/65 R15 sedan tire from 30 PSI to 36 PSI in 30 seconds (A5). Suitable for full-size pickups, light trucks, SUVs, cars, motorcycles, and bicycles, as well as balls and small inflatables.

Image: The GOOLOO A5 Jump Starter connected to a large vehicle tire, actively inflating it. The display shows the PSI reading and battery level.

4.3. Powerbank-funksjon

The unit features a 20,000mAh rated capacity. The A5 includes a built-in 45W USB-C output cable for charging devices like phones and tablets. One full charge supports up to 50 engine starts, 50 minutes of continuous inflation, or multiple device top-ups.

Image: The GOOLOO A5 Jump Starter charging a smartphone using its integrated 45W USB-C cable. The device's display is visible.

4.4. LED-lysfunksjon

A 400-lumen LED flashlight provides illumination with multiple modes: steady lighting, strobe, and SOS. The light can operate for up to 99 hours depending on the mode.

Image: The GOOLOO A5 Jump Starter's 400-lumen LED flashlight is shown illuminating a tire in a dark setting, highlighting its utility as a work light or emergency signal.

4.5. Sunlight-Readable Display

The device features a color LED display with a rotating status ring, offering 2000-nit brightness for clear readability even in direct sunlight. It tracks inflation in real-time.

Image: The GOOLOO A5 Jump Starter's display showing a 20,000mAh battery capacity and various usage statistics like engine starts, tire charges, phone charges, and lighting hours.

5. Oppsett

5.1. Lading av enheten

Before first use, fully charge your GOOLOO Jump Starter. Connect the provided USB-C charging cable to the device's input port and to a suitable USB power adapter (not included). The display will indicate charging progress. A full charge supports numerous operations.

6. Bruksanvisning

6.1. Hoppstart av et kjøretøy

1. Ensure the jump starter unit is sufficiently charged.
2. Plug the smart jumper cables into the jump starter's dedicated port.
3. Koble til den røde (+) clamp til kjøretøyets positive batteripol.
4. Koble til den svarte (-) clamp to the vehicle's negative battery terminal.
5. Check the indicator lights on the smart jumper cables for a correct connection (usually a solid green light). If the battery is extremely low, press the 'BOOST' button on the jumper cable adapter for an extra surge.
6. Start kjøretøyets motor.
7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect them from the jump starter unit.

Image: The GOOLOO A3 Jump Starter connected to a car battery in an engine bay, illustrating the proper setup for jump-starting a vehicle.

6.2. Inflating Tires

1. Connect the air hose to the jump starter's air output port.
2. Attach the air hose nozzle securely to the tire's valve stem.
3. Turn on the jump starter unit. The display will show the current tire pressure.
4. Use the mode button to select the desired pressure unit (PSI, BAR, KPA).
5. Use the '+' and '-' buttons to set your target tire pressure.
6. Press the start button to begin inflation. The unit will automatically stop once the target pressure is reached.
7. Disconnect the air hose from the tire valve and the jump starter.

Image: The GOOLOO A3 Jump Starter actively inflating a tire, with the digital display showing the current pressure.

6.3. Bruk som powerbank

1. Connect your electronic device (smartphone, tablet, etc.) to the USB-A or USB-C output ports on the jump starter using an appropriate charging cable.
2. Enheten vil begynne å lade automatisk.

6.4. Bruk av LED-lyset

1. Press and hold the light button (usually integrated with the power button) for 2-3 seconds to turn on the steady LED light.
2. Press the light button again to cycle through strobe mode.
3. Press the light button a third time for SOS mode.
4. Press the light button a fourth time to turn off the light.

Image: The GOOLOO A3 Jump Starter's LED flashlight is shown illuminating a dark outdoor area, demonstrating its utility for visibility and emergencies.

7. Vedlikehold

• Hold enheten ren og fri for støv og rusk.
• Oppbevar enheten på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer.
• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.

8. Feilsøking

• Enheten slår seg ikke på: Ensure the device is charged. If fully charged, contact support.
• Kjøretøyet starter ikke: Check that jumper cables are correctly connected (red to +, black to -). Ensure the jump starter is fully charged. If the battery is deeply discharged, use the BOOST function.
• Tire not inflating: Check that the air hose is securely connected to both the unit and the tire valve. Ensure the target pressure is set correctly.
• Overheat protection activated: If the device becomes too hot during prolonged use (e.g., multiple jump starts or extended inflation), it may enter overheat protection mode. Allow the unit to cool down before resuming operation.

9. Spesifikasjoner

10. Garanti og støtte

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product's packaging or visit the official GOOLOO webnettstedet.