CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. Introduksjon

Thank you for choosing the CREWORKS 10L Ultrasonic Cleaner. This professional-grade unit is designed for efficient and thorough cleaning of various items using ultrasonic cavitation. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read these instructions carefully before first use and retain them for future reference.

2. Sikkerhetsinstruksjoner

• Koble alltid enheten til et jordet strømuttak.
• Do not operate the unit without liquid in the tank.
• Ensure the power cord is not damaged and avoid placing heavy objects on it.
• Keep the unit away from water splashes and do not immerse the main body in water.
• Ikke berør støpselet med våte hender.
• Koble fra enheten før rengjøring eller vedlikehold.
• Oppbevares utilgjengelig for barn og kjæledyr.
• Use appropriate cleaning solutions. Avoid flammable, corrosive, or highly acidic/alkaline liquids.
• Do not operate the unit continuously for extended periods without allowing it to cool down.
• Sørg for tilstrekkelig ventilasjon rundt enheten under drift.

3. Produktet er overview

The CREWORKS 10L Ultrasonic Cleaner features a robust 304 stainless steel tank and housing, designed for durability and resistance to corrosion. It incorporates a 240W ultrasonic transducer for powerful cleaning and a 300W heater for optimal temperature control. The intuitive analog control panel allows for precise adjustment of cleaning parameters.

This image shows the CREWORKS 10L Ultrasonic Cleaner from the front, highlighting its stainless steel construction and the analog control panel with two rotary knobs and toggle switches.

Nøkkelkomponenter:

• Tank i rustfritt stål: 10-liter capacity, made from high-quality 304 stainless steel.
• Lokk: Reinforced lid to reduce noise during operation.
• Kontrollpanel: Analog dials for temperature and timer, with toggle switches for special modes.
• Dreneringsventil: Convenient brass valve for easy liquid drainage.
• Integrerte håndtak: For easy and safe transport of the unit.
• Rengjøringskurv: Removable stainless steel basket for holding items during cleaning.

A close-up shot of the control panel, clearly showing the temperature and timer dials, along with the power switch and mode selection buttons for Degas and Half-Wave (Delicate) cleaning.

This image shows the ergonomic integrated side handle for easy portability and the robust stainless steel basket designed to hold items during cleaning.

4. Oppsett

1. Utpakking: Carefully remove the ultrasonic cleaner from its packaging. Inspect the unit for any signs of damage.
2. Plassering: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the cleaner.
3. Fylle tanken: Åpne lokket og fyll tanken i rustfritt stål med en passende rengjøringsløsning. Sørg for at væskenivået er mellom MIN- og MAX-merkene. Ikke fyll for mye.
4. Koble til strøm: Koble strømledningen til en jordet stikkontakt.
5. Laster varer: Place the items to be cleaned into the stainless steel basket. Lower the basket into the tank, ensuring items are fully submerged but not touching the bottom of the tank directly.

5. Bruksanvisning

Grunnleggende operasjon:

1. Strøm på: Turn the main power switch to the 'ON' position.
2. Still inn temperatur: Rotate the 'TEMPERATURE' knob to set the desired cleaning temperature between 20°C and 80°C. The 300W heater will begin warming the solution. For faster heating, you may use pre-warmed water.
3. Still inn timer: Rotate the 'TIME' knob to set the desired cleaning duration, from 1 to 30 minutes.
4. Start rengjøring: The ultrasonic cleaning will start automatically once the timer is set. The unit will stop when the timer counts down to zero.

Spesielle moduser:

• Degas Function: Activate the 'DEGAS' toggle switch. This function expels air bubbles from the cleaning liquid, maximizing cavitation effectiveness for deeper cleaning. It is recommended to run Degas for a few minutes before starting a cleaning cycle, especially with fresh solution.


An illustrative image demonstrating the Degas function, where air bubbles are expelled from the cleaning solution to enhance cavitation and cleaning efficiency.

• Delicate (Half-Wave) Mode: Activate the 'SEMI-WAVE' toggle switch. This mode modulates the ultrasonic power, providing a gentler cleaning action suitable for fragile items such as delicate jewelry, PCBs, or lenses, preventing potential damage.


This image visually represents the Delicate (Half-Wave) mode, indicating how ultrasonic power is modulated to provide a gentler cleaning action for sensitive items.

Etter rengjøring:

1. When the cleaning cycle is complete, turn off the unit.
2. Carefully lift the basket out of the tank.
3. Rinse the cleaned items with clean water and dry them thoroughly.
4. Tømme tanken: Place a suitable container under the drain valve. Open the drain valve to empty the cleaning solution. Close the valve once the tank is empty.

A visual comparison showing the effectiveness of the ultrasonic cleaner on various items, with 'Before' and 'After' images of dirty eyeglasses, a used razor blade, and a tarnished printed circuit board.

6. Vedlikehold

• Rengjøring av enheten: After each use, especially after draining, wipe the inside of the tank and the exterior of the unit with a soft, damp klut. Ikke bruk slipende rengjøringsmidler eller senk enheten i vann.
• Basket Care: Clean the stainless steel basket regularly to prevent residue buildup.
• Lagring: Store the ultrasonic cleaner in a cool, dry place when not in use. Ensure the tank is empty and dry.
• Regelmessige kontroller: Periodically inspect the power cord and plug for any damage. Ensure the drain valve operates smoothly.

7. Feilsøking

8. Spesifikasjoner

A diagram showing the external dimensions of the ultrasonic cleaner (33x27x27.5 cm) and the internal dimensions of the tank (30x24x15 cm) and basket (28.3x21.5x12 cm).

9. Garanti og støtte

CREWORKS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.