Amico Dimmer Light Switch User Manual

1. Produktet er overview

The Amico Dimmer Light Switch provides versatile lighting control for your home or office. Designed for both single-pole and 3-way applications, this slide dimmer is compatible with a wide range of dimmable LED, CFL, incandescent, and halogen bulbs. It features a memory function to retain your preferred brightness setting and is ETL certified for safety and quality.

Nøkkelfunksjoner:

• Universal Lighting Control: Suitable for up to 150W dimmable LED/CFL bulbs or 600W incandescent/halogen bulbs.
• Single Pole or 3-Way: Control lights from one or two locations without requiring a neutral wire.
• Minnefunksjon: Retains your last brightness setting after turning off and on.
• Optimal kompatibilitet: Engineered for flicker-free dimming, especially with Amico recessed ceiling lights.
• ETL-sertifisert: Meets rigorous safety standards for residential, commercial, and office use.

Image: The Amico Dimmer Switch provides smooth, flicker-free, and silent dimming, adjustable from 10% to 100% brightness.

2. Sikkerhetsinformasjon

WARNING: RISK OF ELECTRIC SHOCK. Improper installation can result in serious injury or death.

• Always turn off power at the circuit breaker or fuse box before installing or servicing the dimmer switch.
• Hvis du er usikker på noen del av disse instruksjonene, kontakt en kvalifisert elektriker.
• Installer i samsvar med alle nasjonale og lokale elektriske koder.
• Do not use with non-dimmable bulbs.
• Ikke overskrid maksimumsverdientage ratings: 150W for dimmable LED/CFL, 600W for incandescent/halogen.
• Denne enheten er kun til innendørs bruk.
• Sørg for at alle ledningsforbindelser er sikre.

3. Hva er i esken

Your Amico Dimmer Light Switch package includes:

• 1 x Amico Dimmer Light Switch
• 1 x Skrueløs veggplate
• Installation Hardware (e.g., wire nuts, screws)
• Brukerhåndbok

4. Produktspesifikasjoner

Image: The dimmer switch offers high compatibility with various bulb types, including Amico LED, CFL, Incandescent, and Halogen lights, ensuring flicker-free dimming.

5. Installasjonsinstruksjoner

Før du begynner:

• Slå av strømmen ved strømbryteren eller sikringsskapet.
• Ensure the electrical box depth is at least 2 inches (5.08 cm) to accommodate the dimmer switch.
• This dimmer does not require a neutral wire.

Image: Product dimensions and the recommended minimum electrical box depth of 2 inches for proper installation.

Koblingstrinn:

1. Identifiser ledninger: Carefully identify the LINE (hot), LOAD, and GROUND wires in your electrical box. For 3-way installations, identify the two TRAVELER wires.
2. Koble til jordledning: Connect the green wire from the dimmer switch to the bare copper or green ground wire in the wall box.
3. Enpolet ledning:
   • Connect one black wire from the dimmer to the LINE (hot) wire.
   • Connect the other black wire from the dimmer to the LOAD wire (to the light fixture).
   • Cap off the red traveler wires, as they are not used in single-pole setups.
4. 3-veis kabling:
   • Connect the black wire from the dimmer to the common (LINE or LOAD) wire.
   • Connect the two red traveler wires from the dimmer to the two traveler wires in the wall box.
   • Note: Only one dimmer switch can be installed in a 3-way circuit. The other switch must be a standard 3-way ON/OFF switch.
5. Sikre tilkoblinger: Bruk trådmuttere for å sikre alle tilkoblinger. Sørg for at ingen bar ledning er eksponert.
6. Monter dimmer: Carefully push the wired dimmer switch into the wall box. Secure it with the provided screws.

Image: Visual guide for connecting the dimmer switch in both single-pole and 3-way circuit configurations.

Image: The Amico Dimmer Switch is designed for simple installation, even in older homes without a neutral wire, requiring no additional wiring.

Montering av veggplate:

• Before attaching the screwless wall plate, ensure the dimmer switch is level with the wall. If it's not level, the dimmer slider may jam or the wall plate won't fit flush.
• If adjustment is needed, remove the screws, adjust the main body until it's level, and then reinstall.
• Snap the screwless wall plate onto the dimmer switch.

Image: Proper alignment of the dimmer switch with the wall is crucial for the wall plate to sit flush and for smooth slider operation.

6. Bruksanvisning

Slå lysene av/på:

Press the large paddle switch to turn the lights ON or OFF.

Justering av lysstyrke:

Use the vertical slide control on the right side of the paddle switch to adjust the light intensity. Slide up for brighter light and down for dimmer light.

Minnefunksjon:

The dimmer switch features a memory function. It will recall your last set brightness level when the lights are turned back on.

Minimum Brightness Adjustment:

The dimmer includes a sensitivity dial to set the minimum brightness level, preventing flickering at low settings.

1. Trinn 1: Turn the dimmer on and move the slide to the leftmost (lowest) setting.
2. Trinn 2: Rotate the sensitivity dial (located on the side of the switch, accessible when the wall plate is removed) clockwise to increase the minimum brightness, or counter-clockwise to decrease it.
3. Trinn 3: Adjust the dial slowly until the preferred lowest light level is achieved and the lights are not flickering.

Image: Instructions for adjusting the minimum brightness using the sensitivity dial to optimize dimming performance and prevent flickering.

7. Vedlikehold

• Rengjøring: To clean the dimmer switch and wall plate, wipe with a soft, damp klut. Ikke bruk skurende rengjøringsmidler eller løsemidler.
• Undersøkelse: Periodically check the switch for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• Pærekompatibilitet: Ensure that any new bulbs installed are dimmable and within the wattage limits of the dimmer switch.

8. Feilsøking

Lysene slår seg ikke PÅ:

• Check the circuit breaker and ensure power is ON.
• Kontroller at alle ledningsforbindelser er sikre.
• Ensure the bulb is working and properly installed.

Lights flicker or hum:

• Ensure the bulbs are dimmable.
• Adjust the minimum brightness setting using the sensitivity dial (refer to Section 6).
• Bekreft det totale wattettage of the bulbs does not exceed the dimmer's capacity.
• Se etter løse ledningsforbindelser.

Dimmer switch is hot to the touch:

• This is normal for dimmers, especially when operating at higher loads. However, if it feels excessively hot, ensure the total wattage of the bulbs does not exceed the dimmer's capacity.
• Sørg for tilstrekkelig ventilasjon rundt bryteren.

Veggplaten sitter ikke plant:

• Ensure the dimmer switch is level with the wall before installing the wall plate (refer to Section 5).
• Check if the electrical box depth is sufficient.

9. Garanti og støtte

Amico products are designed for reliability and performance. For warranty information, technical support, or assistance with your dimmer switch, please refer to the contact information provided on the product packaging or visit the official Amico webnettstedet. Vennligst ta vare på kjøpsbeviset for garantikrav.