1Mii ML100 Bluetooth 5.0 Audio Receiver User Manual

Introduksjon

The 1Mii ML100 Bluetooth 5.0 Audio Receiver is designed to bring wireless convenience to your audio experience. This compact and powerful device allows you to stream audio wirelessly from your Bluetooth-enabled devices to non-Bluetooth audio systems, such as car stereos, home audio systems, and wired headphones. With its advanced Bluetooth 5.0 technology, built-in microphone for hands-free calls, and long battery life, the ML100 enhances your listening and communication on the go.

Pakkeinnhold

• 1 x 1Mii ML100 Bluetooth Receiver
• 1 x USB-ladekabel
• 1 x 3.5 mm lydkabel
• 1 x 3.5mm Metal Adapter
• 1 x brukerhåndbok

Image: All items included in the 1Mii ML100 package.

Produkt overview og kontroller

Image: Detailed diagram of the ML100 device with labeled components.

Nøkkelkomponenter:

• 3.5 mm lydkontakt: For connecting to non-Bluetooth audio devices.
• Spill av/pause/Bluetooth-paringsknapp: Multi-function button for media control and pairing.
• LED-indikator: Provides status feedback (pairing, connected, charging).
• Volume + / Previous Button: Adjust volume up, or skip to previous track.
• Volume - / Next Button: Adjust volume down, or skip to next track.
• På/av-bryter: For å slå enheten på eller av.
• Ladeport: USB Type-C-port for lading.
• Mic: Innebygd mikrofon for håndfri samtale.

Oppsett og drift

1. Lading av enheten

Before first use, fully charge the ML100. Connect the provided USB charging cable to the charging port on the device and a USB power source (e.g., computer, USB wall adapter). The LED indicator will show charging status. A full charge takes approximately 1.5 hours and provides up to 14 hours of playback.

2. Slå på/av

• Strøm på: Slide the Power On/Off switch to the "ON" position. The LED indicator will light up.
• Slå av: Slide the Power On/Off switch to the "OFF" position. The LED indicator will turn off.

3. Paring med en Bluetooth-enhet

1. Ensure the ML100 is powered on.
2. The device will automatically enter pairing mode (LED indicator will flash). If not, press and hold the Play/Pause/Bluetooth Pairing button for 2 seconds to enter pairing mode.
3. On your Bluetooth-enabled device (smartphone, tablet, etc.), go to Bluetooth settings and search for "ML100".
4. Select "ML100" to connect. The LED indicator will turn solid blue once successfully paired.

Image: Visual guide for powering on, plugging in, pairing, and playing music.

4. Connecting to Audio Equipment

Use the provided 3.5mm audio cable or metal adapter to connect the ML100 to your desired audio system (car AUX port, home stereo, wired headphones, etc.).

Bilde: Eksamples of connecting the ML100 to various non-Bluetooth devices.

Image: Comprehensive compatibility diagram for the ML100.

5. Dobbel tilkobling

The ML100 supports connecting to two Bluetooth devices simultaneously. After pairing the first device, put the ML100 back into pairing mode and connect the second device. This allows for easy switching between audio sources and managing calls from either device.

Image: Dual connection feature of the ML100.

6. Using the Receiver (Control Table)

Spesifikasjoner

Feilsøking

• Enheten slås ikke på: Ensure the battery is charged. Connect to a power source using the USB charging cable.
• Kan ikke pares med Bluetooth-enhet:
  1. Ensure the ML100 is in pairing mode (LED flashing).
  2. Sørg for at Bluetooth er aktivert på kildeenheten din, og at den er innenfor rekkevidde.
  3. Try clearing the pairing list on the ML100 by pressing and holding both Volume + and Volume - buttons for 5 seconds.
  4. Restart both the ML100 and your source device.
• Ingen lydutgang:
  1. Check if the ML100 is successfully paired and connected to your audio system via the 3.5mm jack.
  2. Ensure the volume on both the ML100 and your audio system is turned up.
  3. Verify that the correct input source is selected on your audio system.
• Poor audio quality or disconnections:
  1. Ensure there are no obstructions between the ML100 and your Bluetooth source device.
  2. Move closer to the source device to reduce interference.
  3. Se etter andre trådløse enheter som kan forårsake forstyrrelser.
  4. Ensure the ML100 is fully charged.
• Does not support LDAC codec: The 1Mii ML100 supports AAC but does not support Apt-x or LDAC codecs. If your source device uses these codecs, it will default to a supported codec like SBC or AAC.

Vedlikehold

• Keep the device dry; do not expose it to moisture or extreme temperatures.
• Rengjør enheten med en myk, tørr klut. Ikke bruk sterke kjemikalier eller slipende rengjøringsmidler.
• Oppbevar enheten på et kjølig og tørt sted når den ikke er i bruk over lengre tid.
• Unngå å miste eller utsette enheten for sterke støt.

Brukertips

• For optimal sound quality, ensure your audio source device is also using a high-quality audio output.
• When using in a car, consider plugging the ML100 into a USB car charger for continuous power, especially on long drives, as it can be used while charging.
• Utilize the dual connection feature to seamlessly switch between your phone for calls and a tablet for music during travel.
• If experiencing any lag or connection issues, try resetting the device by clearing the pairing list and re-pairing.

Garanti og støtte

This product comes with a 1-year warranty from the date of purchase. For any technical support or warranty claims, please contact the 1Mii Official Store directly. Please retain your proof of purchase for warranty validation.