1. Introduksjon
The EWIND AC1200M Dual-Band WiFi Repeater is designed to extend the coverage and improve the signal strength of your existing wireless network. Utilizing 802.11ac technology, it effectively eliminates Wi-Fi dead zones and provides a stable, high-speed connection for all your devices. This device supports simultaneous dual-band transmission, offering speeds up to 867Mbps on the 5GHz band and 300Mbps on the 2.4GHz band, totaling 1200Mbps.
Its versatile design allows it to function as a Repeater, Access Point (AP), or Router, making it adaptable to various networking needs. The adjustable high-gain external antennas ensure comprehensive 360-degree signal coverage throughout your home.
2. Spesifikasjoner
| Trekk | Beskrivelse |
|---|---|
| Merke | EWIND |
| Modell | AC1200M |
| Type | Wireless WiFi Repeater / Router / AP |
| Trådløse standarder | IEEE 802.11ac/a/b/g/n |
| Frekvensbånd | 2.4 GHz og 5 GHz |
| 5 GHz Wi-Fi-overføringshastighet | Opptil 867 Mbps |
| 2.4 GHz Wi-Fi-overføringshastighet | Opptil 300 Mbps |
| Total Wireless Transmission Rate | Opptil 1200 Mbps |
| Kablet overføringshastighet | 10/100/1000 Mbps |
| WAN-porter | 1 x 10/100/1000 Mbps |
| LAN-porter | 2 |
| Antenne type | 4 x High-Gain External Antennas (Adjustable 180° rotation) |
| Funksjoner | Repeater, AP, Router, Firewall, VPN |
| Søknad | Home, Broadband VPN |
| Med modemfunksjon | Ja |
3. Pakkens innhold
Sørg for at alle varene er til stede i pakken din:
- 1x EWIND AC1200M Dual-Band Wireless Range Extender
- 1x hurtiginstallasjonsveiledning
4. Installasjonsinstruksjoner
The EWIND AC1200M WiFi Repeater offers two primary setup methods: WPS (Wi-Fi Protected Setup) for quick connection, and manual setup via a web nettleser.
4.1. WPS-oppsett (anbefales for raskt oppsett)
- Plug the repeater into an electrical outlet near your existing router.
- Wait for the Power LED to turn solid.
- Press the WPS button on your EWIND AC1200M Repeater.
- Innen 2 minutter trykker du på WPS-knappen på hovedruteren.
- Wait for approximately 2 minutes. The Wi-Fi signal LEDs on the repeater should light up, indicating a successful connection.
4.2. Manual Setup (via Web nettleser)
- Plug the repeater into an electrical outlet near your existing router.
- Wait for the Power LED to turn solid.
- Connect your computer or mobile device to the repeater's default Wi-Fi network (SSID usually printed on the device label, e.g., "wireless_XXXXXX"). No password is required for the initial connection.
- Åpne a web browser and enter the default IP address or web address (check the device label or quick installation guide for this information, commonly 192.168.1.1 or repeater.local).
- Follow the on-screen instructions to select your host router's 2.4GHz or 5GHz SSID.
- Enter your host router's Wi-Fi password.
- You can choose to modify the extended network names (SSIDs) if desired.
- Complete the setup. Note down your extended network information.
4.3. Videoveiledning for oppsett
For a visual guide on setting up your EWIND AC1200M Extender, please watch the video below:
5. Driftsmåter
The EWIND AC1200M offers three distinct operating modes to suit various networking requirements:
- Repeater-modus: Extends the Wi-Fi coverage of an existing wireless network, eliminating dead zones.
- AP-modus (tilgangspunkt): Converts a wired network connection into a wireless network. This is useful for adding Wi-Fi capability to a wired-only router or network switch.
- Rutemodus: Creates an instant, dedicated wireless communication network, functioning as a primary router. This mode is typically used when connecting directly to a fiber optic modem via PPPOE connection.
6. Optimal plassering
To maximize Wi-Fi coverage and performance, proper placement of your repeater is crucial:
- Plug the extender about halfway between your main router and the Wi-Fi dead zone.
- The chosen location must be within the range of your main router's Wi-Fi signal.
- Ensure the signal strength indicator on the repeater shows at least 2 or more LEDs lit up after relocation. If not, move it closer to the router.
7. Vedlikehold
- Oppbevar enheten på et kjølig og tørt sted, unna direkte sollys og varmekilder.
- Avoid placing the device near obstructions or electronic devices that may cause interference.
- Clean the device regularly with a soft, dry cloth. Do not use liquid cleaners.
- Sørg for god ventilasjon rundt enheten for å forhindre overoppheting.
8. Feilsøking
8.1. Ingen internettilgang etter oppsett
- Kontroller at hovedruteren din har en aktiv internettforbindelse.
- Ensure the repeater is placed within the optimal range of your main router. Relocate if necessary.
- Check if you entered the correct Wi-Fi password for your main router during setup.
- Try restarting both your main router and the repeater.
8.2. Lav tilkoblingshastighet
- Relocate the repeater to a position closer to your main router, ensuring at least 2 signal LEDs are lit.
- Minimize physical obstructions (thick walls, metal objects) between the repeater and your devices.
- Reduce interference from other electronic devices (microwaves, cordless phones).
- Ensure your devices are connecting to the appropriate band (5GHz for higher speeds, 2.4GHz for wider coverage).
8.3. Unable to Access Web Administrasjonsside
- Ensure your device is connected to the repeater's Wi-Fi network.
- Verify the IP address or web address entered in the browser is correct (refer to the device label).
- Tøm nettleserens hurtigbuffer og informasjonskapsler, eller prøv en annen nettleser.
- Deaktiver midlertidig all VPN- eller brannmurprogramvare på datamaskinen din.
8.4. Tilbakestille enheten
If you encounter persistent issues, you may need to reset the repeater to its factory default settings. Locate the Reset button (often a small pinhole) on the device. With the device powered on, use a paperclip or similar object to press and hold the Reset button for about 5-10 seconds until the LEDs flash, then release. The device will restart with factory settings, and you will need to reconfigure it.
9. Brukertips
- Strømforsyning: Always ensure the repeater is plugged into a standard electrical outlet that provides stable power. Refer to the device label for specific voltage krav.
- DHCP Configuration: For advanced users, if you are using the device in AP or Router mode and experience IP address conflicts, you may need to check or disable DHCP settings in the configuration interface. Consult the full manual (if available) or online support for detailed instructions.
- Rekkeviddeoptimalisering: The effective range of the repeater depends heavily on environmental factors like walls, interference, and the placement of your main router. Experiment with different locations to find the best balance between signal strength and coverage.
- Network Name Customization: During manual setup, consider changing the extended network names (SSIDs) to easily distinguish them from your main router's network, or keep them the same for seamless roaming.
10. Garanti og støtte
For warranty information, technical support, or further assistance, please refer to the official EWIND webnettstedet eller kontakt forhandleren din. Ta vare på kjøpskvitteringen som kjøpsbevis.
