LAUNCH X-431 Creader Elite V2.0 For HONDA User Manual

1. Introduksjon

The LAUNCH X-431 Creader Elite V2.0 is a professional diagnostic tool designed to provide comprehensive system diagnostics for Honda and Acura vehicles. This manual provides detailed instructions on how to set up, operate, and maintain your device, ensuring optimal performance and longevity.

Nøkkelfunksjoner inkluderer:

• Full System Diagnostics for Honda/Acura/Dongfeng Honda/GAC Honda.
• Bi-directional Control (Active Test) for component testing.
• All Free Reset Functions (e.g., ABS Bleeding, Oil Reset, SAS Reset, Injector Coding, TPMS Reset, EPB Reset, Gear Learning, Throttle Calibration, AFS Reset, Sunroof Initialization, DPF Regeneration, Battery Matching, etc.).
• Full 10 OBD2 Functions for all OBD-II compliant vehicles.
• Auto VIN Scan for quick vehicle identification.
• Lifetime Free Software Updates via Wi-Fi.
• Android 8.1 OS, 4-inch Touchscreen, 2GB RAM, 16GB Storage, 3000mAh Battery.
• Multi-language support: English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Polish, Traditional Chinese.

2. Sikkerhetsregler og advarsler

To prevent personal injury or damage to vehicles and/or the tool, read this user manual carefully and observe the following safety precautions at a minimum whenever working on a vehicle:

• Bruk aldri dette verktøyet til andre applikasjoner enn det er designet for.
• Aldri endre eller modifisere dette verktøyet på noen måte. Feil bruk og/eller vedlikehold av verktøyet, eller endring av verktøyet kan føre til alvorlig personskade eller død.
• Det er ingen deler som brukeren kan reparere. Få enheten til service av en kvalifisert reparasjonsperson som kun bruker identiske reservedeler. Dette vil sikre at sikkerheten til enheten opprettholdes. Demontering av enheten vil ugyldiggjøre garantiretten.
• Forsiktighet: This tool contains an internal Lithium Polymer battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, pierce or dispose of the battery in fire or water.
• Dette produktet er ikke et leketøy. Ikke la barn leke med eller i nærheten av denne gjenstanden.
• Ikke utsett enheten for regn eller våte forhold.
• Ikke plasser enheten på en ustabil overflate.
• La aldri enheten være uten tilsyn under ladeprosessen. Enheten må plasseres på en ikke-brennbar overflate under lading.
• Håndter enheten med forsiktighet. Hvis enheten faller i bakken, se etter brudd og andre forhold som kan påvirke driften.
• Ikke bruk verktøyet i eksplosive atmosfærer, for eksempel i nærvær av brennbare væsker, gasser eller tungt støv.
• Keep the tool dry, clean, and free of oil, water or grease. Use a mild detergent on a clean cloth to clean the enclosure of the device when necessary.
• Personer med pacemaker bør konsultere legen(e) før bruk. Elektromagnetiske felt i nærheten av pacemakeren kan forårsake pacemakerinterferens eller pacemakersvikt.
• Utfør alltid biltesting i et trygt miljø.
• Ikke prøv å betjene eller observere verktøyet mens du kjører et kjøretøy. Å betjene eller observere verktøyet vil føre til at sjåføren blir distraksjon og kan føre til en dødsulykke.
• Bruk vernebriller som oppfyller ANSI-standarder.
• Keep clothing, hair, hands, tools, test equipment, and other objects away from all moving or hot engine parts.
• Kjør kjøretøyet i et godt ventilert arbeidsområde. Avgasser er giftige.
• Chock the drive wheels and never leave the vehicle unattended while running tests.
• Vær ekstremt forsiktig når du arbeider rundt tennspolen, fordelerhetten, tenningsledningene og tennpluggene. Disse komponentene skaper farlig voltagnår motoren går.
• Sett transmisjonen i P (for A / T) eller N (for M / T) og sørg for at parkeringsbremsen er aktivert.
• Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires within the work area.
• Don't connect or disconnect any test equipment while the ignition is on or the engine is running.

3. Oppsett

3.1 Komponenter og kontroller

Familiarize yourself with the main components and controls of the LAUNCH X-431 Creader Elite V2.0:

1. Ladeport (Type-C): Connects the charging cable to power the tool.
2. Diagnostic Connector (DB-15): Connects to the vehicle's Data Link Connector (DLC) using the diagnostic cable.
3. Strømknapp: Turns the tool on or off.
4. Berøringsskjerm: Displays test results and user interface.
5. Tilbake-knapp: Exits the current screen or returns to the previous screen.
6. Hjem-knapp: Navigates to the main menu screen.
7. Innstillinger -knapp: Quick access to the settings module.

3.2 Powering Up the Tool

The tool can receive power via two methods:

1. Via ladekabel: Plug one end of the included Type-C charging cable into the tool's charging port and the other end into an external power supply device.
2. Via diagnosekabel: Insert one end of the diagnostic cable into the DB-15 connector of the tool, and the other end into the vehicle's DLC.

Når ladelampen lyser grønt, indikerer det at batteriet er fulladet.

3.3 Initial Setup (Getting Started)

For first-time use, follow these steps to configure system settings and update diagnostic software:

1. Trykk på Strømknapp to turn on the tool.
2. On the welcome page, tap Start for å fortsette.
3. Choose your desired system language and tap Neste trinn.
4. Select your time zone and tap Neste trinn to enter the WLAN setup screen.
5. Slide the Wi-Fi switch to ON. The system will search for available wireless networks.
   • If the network is open, you can connect directly.
   • If the network is encrypted, enter the security key (password).
6. After connecting to Wi-Fi, tap Neste trinn to configure workshop information. Input the required details and tap Neste trinn.

   Note: Configured workshop information will be appended to every diagnostic report generated.

7. Carefully read the user agreement. Check the box next to Agree to all the above terms, og trykk på OK to complete the sign-up process and navigate to the Main Menu.

Note: To enjoy more capabilities and better service, it is strongly recommended to update the tool on a regular basis.

3.4 Tilkobling til kjøretøyet

1. Turn the vehicle's ignition off.
2. Locate the vehicle's 16-pin Data Link Connector (DLC).

   

   The DLC is typically located 12 inches from the center of the instrument panel, under or around the driver's side for most vehicles. For some vehicles with special designs, the DLC location may vary. Refer to your vehicle's service manual if you cannot find it.

   

3. Plug one end of the diagnostic cable into the vehicle's DLC, and the other end to the DB-15 diagnostic connector of the tool. Tighten the captive screws.
   • A plastic DLC cover may be found on some vehicles; remove it before plugging in the cable.
   • The cable connector is keyed and will only fit one way. If you have problems connecting, rotate the connector 180° and try again.
4. Slå på tenningen. Motoren kan være av eller gå.

4. Bruksanvisning

4.1 Hovedmeny overview

The main menu provides access to the following function modules:

• Local Diagnose: Configures the tool for professional diagnostic operations.
• OBD II: Quick access to check for DTCs, isolate MIL causes, check monitor status, verify repairs, and perform emission-related services.
• Service Function: Offers coding, reset, relearn, and other service functions.
• Programvareoppdatering: Updates vehicle diagnostic software and APK.
• Mall: Subscribes to additional vehicle diagnostic or service software.
• Flere: Includes Launch Academy, Online Service, Know Your Customer, Toolbox (Diagnostic Software Clear, Firmware Fix, DTC Library, Diagnostic Record, DLC Lookup, Image), and Mine (My Report, My Order, Settings).

4.2 Kjøretøydiagnostikk

This function is designed to diagnose electronic control systems of a single vehicle model, providing comprehensive full-system code coverage and special test functions.

4.2.1 Smart Diagnostics (Auto-Detect)

This function quickly accesses vehicle electronic control systems by decoding the Vehicle Identification Number (VIN), eliminating manual menu selection. Ensure "Automatic detection on connect" is ON in Settings. After connection and ignition ON, the system enters auto-detect mode.

1. Once VIN information is successfully obtained, confirm it and tap OK to start diagnosing all available systems. A diagnostic report will be automatically generated.
2. If VIN access fails, a screen will appear for manual VIN input. Input the VIN and tap OK.

Note: The VIN is usually a 17-character string of uppercase letters and numbers (excluding Q, I, O) found on the dashboard, driver's door, or firewall.

4.2.2 Manual Diagnostics

If Auto-Detect fails, you can perform vehicle diagnosis manually. Ensure the corresponding vehicle manufacturer software is installed. The diagnostic menu varies by vehicle make, model, and year.

Følg disse generelle trinnene:

1. Velge Lokal diagnose.
2. Velge Kjøretøyprodusent.
3. Velge Kjøretøy modell.
4. Velge Skannemodus (Automatic System Detection or Manual System Detection).
5. Velge Test funksjon (e.g., Read Version Information, Read Fault Code, Clear Fault Code, Read Data Stream, Special Function).

4.2.3 Helserapport (hurtigtest)

This function quickly accesses all electronic control units and generates a detailed report on vehicle health. Tap Helserapport on the test item selection screen to scan ECUs. Fault codes are marked with a red cross, and working systems with a green tick.

• Rapportere: Saves the diagnostic result. Access reports via More -> Mine -> My Report.
• Fjern kode: Clears existing diagnostic trouble codes.

4.2.4 Read Fault Code (DTCs)

Displays detailed information of Diagnostic Trouble Codes (DTCs) retrieved from the vehicle's control system. DTCs are five-digit alphanumeric codes indicating a problem area. The first character identifies the main system (B=Body, C=Chassis, P=Powertrain, U=Network), the second indicates code type (0=Generic, 1=Manufacturer Specific), the third identifies the specific system/sub-system, and the fourth/fifth identify the malfunctioning section.

• Hjelp: View DTC help information.
• Kodesøk: Søk etter more information about the current DTC online.
• Rapportere: Save current data in text format.

Note: Never replace parts based solely on DTCs. Consult the vehicle's service manual for proper testing procedures.

4.2.5 Fjern feilkode

Erases codes from the vehicle after repairs. Ensure the ignition key is ON and the engine is OFF before performing this function. Clearing DTCs does not fix underlying problems; if repairs are not made, codes will reappear.

4.2.6 Les datastrøm

Retrieves and displays live data and parameters from the vehicle's ECU. Data can be viewed in text (list), waveform graphs, or combined graphs for comparison. Tap Velg alle or select specific items, then OK til view. Values outside the standard range will display in red.

• Kurve: Displays parameters in waveform graphs.
• Kombinere: Merges graphs for data comparison.
• Rekord: Records diagnostic data for troubleshooting. Access records via More -> Toolbox -> Diagnostic Record.

4.2.7 Actuation Test (Bi-directional Control)

Accesses vehicle-specific subsystem and component tests. The tool sends commands to the ECU to drive actuators (e.g., cycling A/C, fuel pump, parking brake test, oil pressure control, engine compartment fan) and determines system integrity by reading ECU data or monitoring actuator operation. Follow on-screen instructions.

Note: Function menu varies by vehicle make, model, and year. Ensure components are correctly installed before testing.

4.2.8 Special Function (All Maintenance Service Functions)

Offers coding, reset, and relearn functions to restore vehicle systems after repair or replacement. Available tests vary by vehicle. These functions are free and do not require additional purchases in the Mall.

Examples of supported functions include:

• ABS blødning
• Olje Lamp Tilbakestill
• SAS-tilbakestilling (styringsvinkelsensor)
• Injector Reset (Injector Coding)
• TPMS Reset (Tire Pressure Monitoring System)
• EPB-tilbakestilling (elektronisk parkeringsbrems)
• Gearlæring
• Gasskalibrering
• AFS Reset (Adaptive Front-lighting System)
• Initialisering av soltak
• DPF Regeneration (Diesel Particulate Filter)
• Batteritilpasning
• Setekalibrering
• Door Window Calibration
• Transmission Adaption Learn
• SRS Reset (Supplemental Restraint System)
• Og mange flere.

Å få tilgang: Select Diagnose > Select Car Model, Year > Run Autovin > Select Module > Special Functions!

4.3 OBDII Diagnostics (Generic OBD-II Functions)

This scanner supports all 10 test modes for OBD-II compliant cars, essential for daily repair work.

1. Lesekoder: Viser detaljerte beskrivelser av diagnostiske feilkoder (DTC-er).
2. Erasing-koder og tilbakestilling: Slår av motorlampen (MIL), sletter koder og tilbakestiller skjermer.
3. Data strøm: Leser og viser live ECU/PCM-datastrøm, med grafisk plotting.
4. I/M-beredskapsstatus: Shows if emission-related systems are operating properly and ready for inspection.
5. Les direkte datastrøm: Displays continuous data stream in live graphic (waveform) display.
6. View Frys rammedata: Shows vehicle conditions recorded when an emission-related fault occurs.
7. O2 Sensortest: Henter og viser testresultater fra O2-sensormonitoren.
8. Test av innebygd skjerm: Henter og viser testresultater for utslippsrelaterte drivlinjekomponenter.
9. Les kjøretøyinformasjon: Viser VIN, CID (kalibrerings-ID) og CVN (kalibreringsverifiseringsnummer).
10. Komponenttest: Aktiverer visse kjøretøykomponenter via kommandoer fra skanneren for å teste funksjonaliteten.

4.4 Historie

The tool records every diagnostic session. The History function provides direct access to previously tested vehicles, allowing you to resume operations or view past reports. Tap Historie on the Local Diagnose screen to see records by date.

• Tap a vehicle model to view its last diagnostic report.
• To delete history, select items and tap Slett. Bruk Velg alle to delete all records.
• Trykk på Rask tilgang to navigate directly to the function selection page of the last diagnostic operation.

5. Vedlikehold

5.1 Programvareoppdatering

All diagnostic software is updated periodically. It is recommended to update and install the latest software version for the best service, functions, and experience. Pre-installed diagnostic software updates are free for life. Software subscribed in the Mall is free for one year; re-subscribe after expiration.

To update: Tap Programvareoppdatering on the main menu. Select target software and tap Oppdater. Ensure a stable network connection. Software packages will install automatically after download.

5.2 Diagnoseprogramvare Slett

This function allows you to delete diagnostic software that is not frequently used, freeing up storage space.

5.3 Fastvarefiks

Use this module to upgrade and fix diagnostic firmware. Do not cut power or switch to other interfaces during the fixing process.

5.4 Rydde opp

This option allows you to clear cache files and free up storage space on the device.

6. Feilsøking

6.1 DTC-bibliotek

This option allows you to retrieve detailed descriptions of specific Diagnostic Trouble Codes (DTCs) from the built-in database. This helps in understanding the meaning of fault codes without external resources.

6.2 tilbakemelding

If you encounter diagnostic problems that require further analysis, use the Feedback module to send details to the service team for troubleshooting assistance.

6.3 FAQ (Frequently Asked Questions)

This module provides answers to common questions related to the tool's operation and features.

6.4 Gjenoppretting

This option allows you to reset the tool to its default factory settings. Be aware that resetting may cause data loss, so proceed with caution.

7. Spesifikasjoner

7.1 Pakkeliste

Produktpakken inneholder følgende varer:

• 1pc * Main Unit (Diagnostic tool)
• 1pc * OBD2 Cable (Detachable)
• 1pc * User Manual
• 1pc * Quick Start Guide
• 1pc * GPSR safety warning

8. Garanti og støtte

8.1 Garantiinformasjon

LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH is not liable for any consequential or incidental damages.

Final determination of defects is made by LAUNCH. No agent, employee, or representative of LAUNCH has authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.

The product also comes with a 5-year warranty as stated in the product description.

8.2 Customer Service & Technical Support

For questions on operation or technical issues, contact the seller or LAUNCH TECH Service Center:

• Webnettsted: https://en.cnlaunch.com
• Telefon: +86 755 8455 7891
• E-post: overseas.service@cnlaunch.com

When providing feedback, clearly state the Serienummer of your product for quick and efficient problem resolution.

8.3 Online tjeneste

The tool includes an "Online Service" module where you can contact service staff for immediate technical support directly through the device.

8.4 Launch Academy

Access the "Launch Academy" module for abundant repair cases, operation skills, and training videos for quick reference and learning.

9. Brukertips

• Kjøretøy kompatibilitet: Før kjøpasing or performing diagnostics, it is highly recommended to verify compatibility with your specific vehicle model and year. If unsure, contact customer support with your car's VIN.
• Free Special Functions: All special features and reset functions are included for free; there is no need to purchase additional special features in the Mall for Honda/Acura vehicles.
• Active Test Usage: When performing active tests (bi-directional control), ensure that the components being tested are correctly installed to prevent damage or inaccurate results.
• Diagnostic Report Management: Utilize the screenshot and screen recorder features to save diagnostic data. Diagnostic reports can be easily printed by scanning the QR code to share them first.
• Programvareoppdateringer: Regularly update the diagnostic software via Wi-Fi to ensure you have the latest features, vehicle coverage, and bug fixes for optimal performance.