Ulanzi MT86 Phone Tripod Stand User Manual

Introduksjon

The Ulanzi MT86 is a versatile and lightweight phone tripod stand designed for smartphone users. It functions as both a stable tripod and an extendable selfie stick, featuring an automatic pop-open leg mechanism, a flexible phone clamp with cold shoe mount, and a detachable Bluetooth remote control. This manual provides detailed instructions for its proper use and maintenance.

Figure 1: Ulanzi MT86 Phone Tripod Stand overview

Pakkeinnhold

Vennligst sjekk pakken for å sikre at alle varene er til stede:

• Ulanzi MT86 Selfie Stick / Tripod Stand x 1
• Brukerhåndbok x 1

Figure 2: Included items (black version shown)

Nøkkelfunksjoner

• Automatic Pop-Open Legs: Effortless deployment of tripod legs upon setting down.
• Four-Leg Support: Enhanced stability with non-slip pads, supporting up to 1kg.
• Flexible Phone Clamp: Rotates and tilts for easy switching between portrait, landscape, and overhead angles.
• Cold Shoe Mount: Integrated mount for attaching small lights, microphones, or other accessories.
• Utvidbar design: Functions as a selfie stick, extending up to 1.53m (tripod mode) or 1.46m (selfie stick mode).
• Detachable Bluetooth Remote: Wireless control for capturing photos and videos from up to 10m away.
• Lett og bærbar: Weighs approximately 380g, making it easy to carry.
• Bred kompatibilitet: Phone clamp fits smartphones between 5.6cm and 9.2cm wide.

Oppsettinstruksjoner

1. Deploying the Tripod Legs

1. Hold the MT86 vertically.
2. Gently set the base of the unit down on a flat, stable surface. The four legs will automatically pop open and lock into position.
3. Ensure all four legs are fully extended and stable before attaching your device.

Figure 3: Automatic leg deployment

2. Koble til smarttelefonen

1. Forleng telefonklemmenamp by pulling the top part upwards.
2. Plasser smarttelefonen forsiktig i CL-en.amp, ensuring it is securely held between 5.6cm and 9.2cm width.
3. Adjust the phone's position for desired balance.

Figure 4: Phone clamp adjustments and compatibility

3. Paring av Bluetooth-fjernkontrollen

1. Slide down the remote control from the handle to detach it.
2. Slå på fjernkontrollen (vanligvis ved å trykke og holde inne knappen). En indikatorlampe vil blinke, noe som indikerer at den er i paringsmodus.
3. Gå til Bluetooth-innstillingene på smarttelefonen din og søk etter tilgjengelige enheter.
4. Select "Ulanzi Remote" or a similar name to pair. The indicator light on the remote will stop flashing once paired.
5. The remote can control your phone's camera shutter from up to 10 meters away.

Figure 5: Detaching the Bluetooth remote

Bruksanvisning

1. Using as a Tripod Stand

• Ensure the legs are fully deployed and stable on a flat surface.
• Extend the telescopic pole to your desired height. The MT86 can extend up to 1.53m in tripod mode.
• Juster telefonens klamp's angle (rotation ±90°, tilt 90°) to achieve the perfect shot.
• Bruk Bluetooth-fjernkontrollen til å ta bilder eller starte/stoppe videoopptak.

Figure 6: Tripod in floor stand mode (max height 1.48m shown)

2. Bruk som selfiestang

• Brett stativbeina tilbake i håndtaket.
• Extend the telescopic pole to your desired length for selfies or group shots, up to 1.46m.
• Hold the handle firmly and use the Bluetooth remote to take pictures or record videos.

Figure 7: Selfie stick mode in use

3. Using the Cold Shoe Mount

• Locate the cold shoe mount on the side of the phone clamp.
• Slide compatible accessories, such as small LED lights or external microphones, into the cold shoe mount.
• Ensure accessories are securely attached before use.

Figure 8: Cold shoe mount with an attached accessory

Vedlikehold

• Rengjøring: Wipe the tripod stand with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Lagring: Store the MT86 in a cool, dry place away from direct sunlight and extreme temperatures.
• Fjernkontroll batteri: The Bluetooth remote uses a replaceable button cell battery. If the remote stops responding, replace the battery.
• Unngå overbelastning: Do not exceed the maximum load capacity of 1kg to prevent damage.

Feilsøking

Problem: Tripod legs do not open automatically.

Løsning: Ensure the tripod is placed on a flat surface. If the mechanism feels stiff, gently assist the legs to open. Check for any obstructions.

Problem: Bluetooth remote control does not pair or respond.

Løsning:

1. Ensure the remote is turned on and within 10m of your phone.

2. Check the remote control's battery and replace if necessary.

3. Unpair and re-pair the remote in your phone's Bluetooth settings.

4. Restart your phone and try pairing again.

Problem: Phone clamp does not hold the phone securely.

Løsning: Ensure your phone's width is within the compatible range (5.6cm-9.2cm). Make sure the clamp is fully extended and gripping the phone firmly. Avoid using overly thick phone cases that might prevent a secure grip.

Spesifikasjoner

Figure 9: Ulanzi MT86 Specifications

Brukertips

• For optimal stability, always extend the tripod legs fully and ensure they are on a level surface.
• When using the selfie stick mode, hold the handle firmly to prevent accidental drops, especially when fully extended.
• To conserve battery life for the remote, turn it off when not in use.
• Experiment with different phone clamp angles to find the most dynamic shots for your content.
• Remember to switch between photo/video modes directly on your phone's camera app, as the remote only triggers the shutter.

Garanti og støtte

Ulanzi products are designed for reliability and performance. For any technical assistance, warranty claims, or product inquiries, please refer to the contact information provided in your original purchase documentation or visit the official Ulanzi webnettstedet.

Vennligst ta vare på kjøpsbeviset av garantihensyn.