GRAEF CC150DE Electric Knife Sharpener Instruction Manual

1. Introduksjon

This manual provides detailed instructions for the safe and effective use of your GRAEF CC150DE Electric Knife Sharpener. Please read all instructions carefully before operating the device and retain this manual for future reference.

The GRAEF CC150DE is designed to sharpen and polish various types of kitchen knives, including smooth and serrated household knives, as well as specialized Japanese knives, using a multi-stage sharpening process with diamond and ceramic discs.

2. Sikkerhetsinstruksjoner

• Always ensure the sharpener is placed on a stable, flat surface before use.
• Hold hender og fingre unna slipesporene under bruk.
• Ikke senk spisseren i vann eller annen væske. Rengjør medamp bare klut.
• Unplug the device from the power outlet when not in use, before cleaning, or if a malfunction occurs.
• Dette apparatet er ikke beregnet for bruk av personer (inkludert barn) med reduserte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og kunnskap, med mindre de har fått tilsyn eller instruksjoner om bruk av apparatet av en person som er ansvarlig for deres sikkerhet.
• Ikke forsøk å slipe sakser eller andre verktøy som ikke er spesifisert for denne enheten.
• Avoid applying excessive pressure when sharpening, as this can damage the knife blade or the sharpener.
• Ensure the power cord is not damaged and does not come into contact with hot surfaces or sharp edges.

3. Produktet er overview

3.1 Funksjoner

• Two-Phase Diamond Sharpening: Utilizes diamond discs for initial sharpening at 15° and 20° angles.
• Ceramic Polishing/Honing: A third phase with ceramic discs for fine polishing and deburring.
• Dual Sharpening Angles: 15° for Japanese knives and 20° for European/household knives (smooth and serrated).
• Slow-Rotating Abrasive Discs: Prevents overheating of the knife blade, preserving its integrity.
• Elastomer Angle Guide: Ensures precise blade positioning for consistent sharpening results.
• Minimal Material Removal: Designed to remove only the necessary amount of material, extending knife life.
• På/av-bryter: Convenient control for operation.

3.2 Komponenter

The GRAEF CC150DE features a robust plastic casing and three distinct sharpening phases:

• Fase 1: Diamond sharpening for 15° angle (primarily for Japanese knives).
• Fase 2: Diamond sharpening for 20° angle (for European/household knives).
• Fase 3: Ceramic polishing/honing for all knife types.
• Strømbryteren: Located on the front for easy access.

Bilde: Overview of the GRAEF CC150DE Electric Knife Sharpener, highlighting its compact design and clearly labeled sharpening slots (1, 2, 3) and the power switch.

Image: A detailed close-up of the GRAEF CC150DE's sharpening slots, clearly showing the numerical labels for Phase 1, Phase 2, and Phase 3.

4. Oppsett

1. Unpack the GRAEF CC150DE sharpener and remove all packaging materials.
2. Place the sharpener on a clean, dry, and stable surface. Ensure there is enough space around the unit for safe operation.
3. Plug the power cord into a suitable 230 Volt electrical outlet.
4. Ensure the power switch is in the "Off" position before plugging in.

5. Bruksanvisning

Before sharpening, ensure your knife blade is clean and dry. Always pull the knife towards you, never push it away from you, and apply gentle, consistent pressure.

5.1 Sharpening Japanese Knives (15° Angle)

1. Turn on the sharpener using the power switch.
2. Insert the heel of the knife blade into Fase 1 (15° diamond sharpening slot).
3. Pull the knife slowly and steadily towards you, maintaining light, even pressure, from the heel to the tip. The elastomer guide will help maintain the correct angle.
4. Repeat this process 3-5 times for each side of the blade, alternating between the left and right slots of Phase 1.
5. Flytt til Fase 3 (ceramic polishing slot). Insert the heel of the knife blade into Phase 3.
6. Pull the knife slowly and steadily towards you, applying very light pressure, from the heel to the tip.
7. Repeat this process 3-5 times for each side of the blade, alternating between the left and right slots of Phase 3, to achieve a fine, polished edge.
8. Turn off the sharpener and carefully wipe the blade clean with a damp klut.

Image: Illustration of knives being sharpened, demonstrating the 15° and 20° sharpening angles supported by the device for different knife types.

5.2 Sharpening European/Household Knives (20° Angle)

1. Turn on the sharpener using the power switch.
2. Insert the heel of the knife blade into Fase 2 (20° diamond sharpening slot).
3. Pull the knife slowly and steadily towards you, maintaining light, even pressure, from the heel to the tip.
4. Repeat this process 3-5 times for each side of the blade, alternating between the left and right slots of Phase 2.
5. Flytt til Fase 3 (ceramic polishing slot). Insert the heel of the knife blade into Phase 3.
6. Pull the knife slowly and steadily towards you, applying very light pressure, from the heel to the tip.
7. Repeat this process 3-5 times for each side of the blade, alternating between the left and right slots of Phase 3, to achieve a fine, polished edge.
8. Turn off the sharpener and carefully wipe the blade clean with a damp klut.

Image: A close-up of a diamond, symbolizing the durable diamond abrasive discs used in Phases 1 and 2 for optimal blade construction and minimal material removal without overheating.

5.3 Polishing/Honing Only (Phase 3)

For knives that are already sharp but require a finer edge or occasional honing, you can use Phase 3 directly.

1. Slå på sliperen.
2. Insert the heel of the knife blade into Fase 3 (ceramic polishing slot).
3. Pull the knife slowly and steadily towards you, applying very light pressure, from the heel to the tip.
4. Repeat this process 5-10 times for each side of the blade, alternating between the left and right slots of Phase 3.
5. Turn off the sharpener and carefully wipe the blade clean with a damp klut.

Image: A knife with a finely polished edge, shown next to sliced fruit, illustrating the sharp and clean cut achieved after using the polishing phase.

6. Vedlikehold

• Trekk alltid ut støpselet til sliperen før rengjøring.
• Tørk av utsiden av enheten med en myk, damp klut. Ikke bruk slipende rengjøringsmidler eller senk enheten i vann.
• Periodically, remove any metal dust or debris that may accumulate in the sharpening slots. Use a soft brush or a vacuum cleaner with a narrow attachment.
• Store the sharpener in a dry, safe place when not in use.

7. Feilsøking

8. Spesifikasjoner

9. Garanti og støtte

For warranty information, technical support, or inquiries regarding spare parts, please contact GRAEF customer service directly or visit their official webSpesifikke garantivilkår kan variere avhengig av region og forhandler.

Information regarding the availability of spare parts is not provided in this manual. Please contact the manufacturer for details.