JBL Stage 602 6-1/2" 2-veis koaksiale bilstereohøyttalere brukerhåndbok

Introduksjon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JBL Stage 602 6-1/2" 2-Way Coaxial Car Audio Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance.

Nøkkelfunksjoner

• Høyttalertype: 6.5" Stage Series 2-Way Coaxial Car Speakers
• Kjegle materiale: Injection-molded polypropylene cone for enhanced durability and sound quality.
• diskant: PEI Balanced Dome Tweeter for clear high-frequency reproduction.
• Impedans: 4 ohms, optimized for compatibility with a wide range of car audio systems.
• Frekvensrespons: 55 - 22000 Hz, providing a broad audio spectrum.
• Følsomhet: 91dB, ensuring efficient power conversion into sound.
• Strømhåndtering: 135W Peak / 45W RMS per speaker.
• Top-Mount Depth: 2-5/16" for flexible installation.

Pakkeinnhold

Din JBL Stage 602 speaker package typically includes the following items:

• Two (2) JBL Stage 602 6-1/2" Coaxial Speakers
• To (2) høyttalergitter
• Monteringsutstyr (skruer, klips)
• Speaker Brackets (for various mounting options)
• Speaker Foam (for minimizing unwanted sounds/vibrations)
• Owner's Manual / Documentation

Oppsett og installasjon

Proper installation is crucial for optimal sound performance and speaker longevity. If you are unsure about any steps, it is recommended to seek professional assistance.

1. Sikkerhetsregler

• Koble fra kjøretøyets batteri før du starter noe elektrisk arbeid.
• Bruk passende verneutstyr, inkludert øyebeskyttelse.
• Ensure all wiring is correctly connected to prevent damage to the speakers or vehicle's electrical system.
• Avoid overtightening screws to prevent stripping or damaging mounting surfaces.

2. Forberedelse for installasjon

1. Fjern eksisterende høyttalere: Carefully remove the existing car audio speakers from their mounting locations (e.g., door panels, rear deck). This may involve removing trim panels, screws, and disconnecting wiring.
2. Sjekk tilpasning: Compare the JBL Stage 602 speakers with the original speakers and the mounting location. Use the provided mounting brackets if necessary to ensure a secure fit.
3. Kabling: Identify the positive (+) and negative (-) speaker wires from your vehicle's audio system. Ensure proper polarity when connecting the new speakers.

3. Speaker Mounting

1. Sikre høyttalere: Place the JBL Stage 602 speakers into the prepared mounting locations. Use the provided screws to secure them firmly. If using mounting brackets, attach the brackets first, then the speakers to the brackets.
2. Påfør skum: Apply the included speaker foam around the speaker's edge where it meets the mounting surface. This helps to minimize vibrations and improve sound quality by creating a better seal.
3. Koble til ledninger: Connect the vehicle's speaker wires to the terminals on the JBL Stage 602 speakers. Ensure the positive (+) wire connects to the positive terminal and the negative (-) wire connects to the negative terminal.
4. Install Grilles: If desired, attach the speaker grilles over the speakers.
5. Sett sammen igjen: Reassemble any removed trim panels or components.

4. General Installation Guidance

For a visual guide on upgrading car audio speakers, including insights into speaker components and mounting options, refer to the video below. This video provides general information applicable to JBL GTO series speakers, which share similar installation principles.

Betjening av høyttalerne

Once installed, your JBL Stage 602 speakers will operate as part of your vehicle's existing audio system. No specific operational controls are on the speakers themselves.

• Lydkilde: Spill av lyd gjennom bilens hovedenhet (radio, CD-spiller, mediespiller).
• Volumkontroll: Adjust the volume using your head unit's controls.
• Tonekontroller: Utilize your head unit's equalizer (EQ), bass, treble, and balance/fader controls to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
• Innkjøringsperiode: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve their optimal sound performance.

Vedlikehold og stell

To ensure the longevity and continued performance of your JBL Stage 602 speakers, follow these maintenance guidelines:

• Rengjøring: Gently wipe the speaker grilles and surrounds with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Unngå overmakt: Do not drive the speakers with an amplifier that exceeds their recommended RMS power handling (45W RMS per speaker) to prevent damage.
• Miljøfaktorer: Protect speakers from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.
• Regelmessig inspeksjon: Periodically check the speaker cones and surrounds for any signs of damage or wear.

Feilsøking

If you experience issues with your speakers, consult the following common troubleshooting steps:

Spesifikasjoner

Garanti og støtte

JBL Stage 602 speakers come with a 1 års begrenset garanti. For warranty claims, technical support, or further assistance, please contact JBL customer service or visit the official JBL webnettstedet.

For ytterligere produktinformasjon og støtte kan du besøke JBL-butikk på Amazon.