JBL CONTROL 52

JBL Professional Control 52 Surface-Mount Satellite Speaker

Model: CONTROL 52

Bruksanvisning

Introduksjon

The JBL Professional Control 52 is a stylish surface-mount satellite loudspeaker designed for subwoofer-satellite loudspeaker systems. It delivers superb high-fidelity sound through a low-distortion 60 mm (2.5 inch) driver. Key features include a secondary bucking magnet for high efficiency, a rubber half-roll surround for enhanced bass performance, a 19 mm (0.75 inch) copper-clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for consistent impedance and extended high-frequency response. The included wall bracket allows for angling the speaker up to 45 degrees off-axis, providing flexible placement options.

Nøkkelfunksjoner

Hva er i esken

Oppsett og installasjon

The Control 52 satellite speakers are designed for surface mounting and come with all necessary brackets for installation. Ensure you have appropriate tools and follow local building codes for secure mounting.

JBL Control 52 Satellite Speaker, front view

Figur 1: Foran view of the JBL Control 52 Satellite Speaker.

Montering av høyttalerne

  1. Identifiser monteringssted: Choose a location on a wall or other suitable surface that provides optimal sound dispersion and is structurally sound. The speakers can be angled up to 45 degrees.
  2. Fest braketter: Use the included wall-mount brackets. Securely attach the brackets to the chosen surface using appropriate screws and anchors (not included, depending on wall material).
  3. Koble til ledninger: Koble til høyttalerledninger fra din amplifier to the binding posts on the back of each Control 52 speaker. Ensure correct polarity (red to positive, black to negative).
  4. Monter høyttalere: Attach the Control 52 speakers to the installed brackets. The design allows for various orientations (vertical or horizontal) and angles.
Pair of JBL Control 52 Satellite Speakers with wall mounts

Figure 2: A pair of JBL Control 52 Satellite Speakers, showing the integrated wall mounts.

Kablingstilkoblinger

The Control 52 speakers are passive and require an external amplifier. Connect the speaker wires to the spring-loaded terminals on the rear of each speaker. Match the positive (+) terminal on the speaker to the positive (+) terminal on your amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on your amplivligere.

Side view of JBL Control 52 Satellite Speaker showing mounting bracket

Figur 3: Side view of the JBL Control 52 Satellite Speaker, highlighting the adjustable mounting bracket.

Video Guide: Speaker Wiring and Mounting

Video 1: This video demonstrates general speaker wiring and mounting techniques, which can be applied to the JBL Control 52 speakers. It shows how to connect speaker cables and secure speakers using brackets.

Bruksanvisning

Once properly installed and connected to a compatible amplifier, the JBL Control 52 speakers are ready for use. These speakers are designed to work as part of a subwoofer-satellite system, meaning they handle mid-range and high frequencies, while a separate subwoofer handles the bass.

Slår på/av

The Control 52 speakers are passive and do not have their own power switch. They are powered by the connected amplifier. Turn your amplifier on or off to control the speakers.

Volumkontroll

Juster volumet ved hjelp av amplifier or audio source. Avoid setting the volume too high, which can cause distortion and potentially damage the speakers.

Optimal plassering

For the best audio experience, position the speakers to create a balanced sound field. Experiment with the angling feature of the wall brackets to direct sound towards the primary listening area. When used with a subwoofer, ensure the subwoofer is placed in a location that provides even bass distribution throughout the room.

Vedlikehold

Regular maintenance helps ensure the longevity and optimal performance of your JBL Control 52 speakers.

Feilsøking

If you experience issues with your JBL Control 52 speakers, refer to the following common troubleshooting steps:

ProblemMulig årsakLøsning
Ingen lyd fra høyttalere
  • AmpLydgiveren er av eller dempet.
  • Incorrect speaker wiring.
  • Audio source not playing or improperly connected.
  • Sikre amplifier is on and volume is up, not muted.
  • Check all speaker wire connections for correct polarity (+ to + and - to -).
  • Verify audio source is active and connected correctly to the amplivligere.
Forvrengt eller uklar lyd
  • Volume too high on amplifier eller kilde.
  • Skadet høyttalerledning.
  • Upassende ampinnstillinger for kjøler.
  • Reduce volume on ampvarmekilde eller lydkilde.
  • Inspiser høyttalerledningene for skader og skift dem ut om nødvendig.
  • Sjekke amplifier settings (e.g., tone controls, crossover settings) to ensure they are appropriate for satellite speakers.
En høyttaler fungerer ikke
  • Loose or incorrect wiring for that speaker.
  • Feil på høyttaleren.
  • Check wiring connections for the non-working speaker.
  • Swap the non-working speaker with a working one to determine if the speaker itself is faulty.

Spesifikasjoner

ModellnavnKONTROLL 52
MerkeJBL
HøyttalertypeSatellite Speaker (for Subwoofer-Satellite Loudspeaker System)
MonteringstypeOverflatefeste
Høyttaler AmplifikasjonstypePassiv
Impedans16 Ohm
Frekvensrespons140 Hz – 20 kHz
Høyttaler Maksimal utgangseffekt600 watt (topp)
Basshøyttalerdiameter60 mm
Diskanthøyttalerens diameter19 mm
Produktdimensjoner2"D x 5"W x 3"H (approximate, per speaker)
Varevekt3.7 pund (per høyttaler)
FargeSvart
MaterialeAluminium
Innendørs/utendørs brukInnendørs
TilkoblingsteknologiKablet
Anbefalt brukFor surroundlydsystemer
UPC050036905190

Garanti og støtte

The JBL Professional Control 52 Surface-Mount Satellite Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official JBL webnettstedet.

For technical support, service, or additional product information, please contact JBL customer service or visit the JBL-butikk på Amazon.

Relaterte dokumenter - KONTROLL 52

Preview JBL 5000-seriens kinosystemer: Brukerhåndbok og spesifikasjoner
Omfattende brukerhåndbok for JBL 5000-serien av kinosystemer, med detaljer om systemkonfigurasjoner, digital kontroll, tilkoblinger, strømkrav, plassering av høyttalere og tekniske spesifikasjoner for modellene 5671, 5672 og 5674.
Preview JBL Control 416C/T Standard Coverage Series takhøyttaler – Tekniske spesifikasjoner
Detaljerte tekniske spesifikasjoner, funksjoner og ytelsesdata for JBL Control 416C/T, en 6.5-tommers toveis koaksial takhøyttaler designet for kommersielle og profesjonelle lydinstallasjoner.
Preview JBL 4367 Brukerhåndbok: 15-tommers 2-veis gulvstående høyttaler
Denne brukerhåndboken gir detaljert informasjon om JBL 4367, en 15-tommers 2-veis gulvstående høyttaler. Lær om oppsett, plassering, tilkoblinger, kontroller og vedlikehold for optimal lydytelse.
Preview JBL JS-120 høyttalerstativ – funksjoner, spesifikasjoner og montering
Detaljert informasjon om JBL JS-120 høyttalerstativ, inkludert funksjoner, tekniske spesifikasjoner, kompatible høyttalermodeller og monteringsanvisninger. Utviklet for forbedret lydytelse og stabilitet.
Preview JBL 5000-seriens kinosystemer brukerhåndbok for profesjonelle skjermkanalhøyttalere
Omfattende brukerhåndbok for JBL 5000-seriens kinosystemer (modellene 5671, 5672, 5674). Dekker installasjon, konfigurasjon, digital kontroll, tilkoblinger, strøm, plassering og detaljerte spesifikasjoner for profesjonell kinolyd.
Preview JBL STX812M Technical Manual and Specifications
Detailed technical manual and specifications for the JBL STX812M professional loudspeaker, including acoustic, electrical, and physical characteristics, wiring diagrams, and component part lists.