Focal SUB 600P Active Subwoofer User Manual

1. Introduksjon

Thank you for choosing the Focal SUB 600P Active Subwoofer. This product is designed to deliver powerful, controlled bass, enhancing both your Hi-Fi audio and Home Cinema experiences. Featuring a Class-D 600-watt amplifier and a 12-inch Polyflex speaker driver, its closed design ensures faithful reproduction of the original sound signal by minimizing interference noise. Please read this manual carefully to ensure proper installation, operation, and maintenance of your subwoofer.

2. Sikkerhetsinstruksjoner

Please observe the following safety precautions to prevent damage to the unit and ensure your safety:

• Strømforsyning: Connect the subwoofer only to an AC power source that matches the voltage indicated on the unit. Ensure the power cord is not pinched or walked on.
• Ventilasjon: Ikke blokker noen ventilasjonsåpninger. Sørg for tilstrekkelig plass rundt enheten for riktig luftstrøm for å forhindre overoppheting.
• Vann og fuktighet: Ikke utsett enheten for regn, fuktighet, drypp eller sprut. Ikke plasser gjenstander fylt med væske, som for eksempel vaser, oppå enheten.
• Varmekilder: Keep the unit away from radiators, heat registers, stoves, or other heat-producing apparatus.
• Rengjøring: Unplug the unit from the wall outlet before cleaning. Use only a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners.
• Service: Ikke prøv å utføre service på dette produktet selv. Henvis all service til kvalifisert servicepersonell.

3. Pakkens innhold

Ved utpakking, vennligst kontroller at alle elementene som er oppført nedenfor er til stede:

• 1 x Focal SUB 600P Active Subwoofer
• 1 x strømkabel
• 1 x brukerhåndbok (dette dokumentet)

4. Oppsett

4.1. Plassering

The placement of your subwoofer significantly impacts its performance. Consider the following guidelines:

• Hjørneplassering: Placing the subwoofer in a corner often maximizes bass output due to room acoustics.
• Veggnærhet: Placing it near a wall can also enhance bass, but avoid placing it directly against a wall if it causes excessive boominess.
• Lytteposisjon: Experiment with different positions relative to your main listening area to find the optimal balance and impact.

Bilde: Forfra vinklet view of the Focal SUB 600P Active Subwoofer, showcasing its sleek black finish and exposed 12-inch driver.

4.2. Tilkoblinger

Before making any connections, ensure the subwoofer is unplugged from the power outlet. The SUB 600P features RCA connectivity for audio input.

1. Connect to Receiver/Amplivligere: Use a high-quality RCA cable to connect the 'LFE' or 'Subwoofer Out' port on your AV receiver or amplifier to the 'LINE INPUTS' (L/R) on the rear panel of the SUB 600P. If your receiver has a single LFE output, you can connect it to either the L or R input on the subwoofer.
2. Strømtilkobling: Once audio connections are secure, connect the power cable to the subwoofer's AC inlet and then to a suitable wall outlet.

Image: Rear panel of the Focal SUB 600P Active Subwoofer, displaying the various controls and input/output connections, including Line Inputs, Volume, Phase, Crossover, and Power switch.

Rear Panel Controls Overview:

• AUTO STANDBY / ON: Switch to enable or disable the automatic standby feature.
• FASE: Adjusts the phase of the subwoofer output (0° or 180°) to match your main speakers.
• CROSSOVER: Controls the upper frequency limit of the subwoofer's output.
• VOLUM: Justerer det totale utgangsnivået til subwooferen.
• LINE INPUTS (L/R): RCA inputs for connecting to your audio source.
• VOLTAGE UTVALG: Switch to select the appropriate voltage for your region (e.g., 120V or 230V). Ensure this is set correctly before powering on.
• POWER I/O: Hovedstrømbryter.

5. Drift

5.1. Slå på/av

To power on the subwoofer, ensure the power cable is connected and flip the 'POWER I/O' switch on the rear panel to the 'ON' position. The subwoofer will enter standby mode if the 'AUTO STANDBY' feature is enabled and no audio signal is detected for a period.

5.2. Justere innstillinger

After initial setup, fine-tune the subwoofer's performance using the rear panel controls:

• Volum: Start with the volume knob at a low setting and gradually increase it until the bass blends seamlessly with your main speakers without overpowering them.
• Crossover: Adjust the crossover frequency to match the low-frequency capabilities of your main speakers. A common starting point is 80Hz, but this may vary depending on your system.
• Fase: Experiment with the 0° and 180° phase settings. Choose the setting that provides the most impactful and coherent bass response at your listening position.

6. Vedlikehold

To ensure the longevity and optimal performance of your Focal SUB 600P, follow these maintenance guidelines:

• Rengjøring: Dust the cabinet regularly with a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water. Avoid using abrasive cleaners, waxes, or solvents as they can damage the finish.
• Miljø: Keep the subwoofer in a stable environment, away from extreme temperatures, humidity, and direct sunlight.
• Ventilasjon: Ensure that the ventilation openings are always clear and not obstructed by objects or dust buildup.

7. Feilsøking

If you encounter issues with your subwoofer, refer to the table below for common problems and their solutions:

8. Spesifikasjoner

Key technical specifications for the Focal SUB 600P Active Subwoofer:

9. Garantiinformasjon

The Focal SUB 600P Active Subwoofer comes with a Limited Warranty. For detailed information regarding the terms, conditions, and duration of your warranty, please refer to the warranty card included with your product or visit the official Focal webnettstedet. Vennligst ta vare på kjøpsbeviset for eventuelle garantikrav.

10. Støtte

For further assistance, technical support, or service inquiries, please contact Focal customer support or visit their official website. You can find more information and resources at the Focal Store på Amazon eller produsentens offisielle webnettstedet.