VEVOR CPF-10000 Pressurized Biological Pond Filter User Manual

1. Introduksjon

Thank you for choosing the VEVOR CPF-10000 Pressurized Biological Pond Filter. This filter system is designed to maintain clear and healthy water in your pond by combining mechanical and biological filtration with a built-in UV-C clarifier. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

2. Sikkerhetsinstruksjoner

Følg alltid følgende sikkerhetsregler for å forhindre skade eller skade på produktet:

• Always disconnect the power supply to the filter and pump before performing any maintenance, cleaning, or installation.
• Ensure the filter is installed on a stable, level surface.
• Ikke bruk UV-C lamp outside of the filter housing. Direct exposure to UV-C radiation can cause severe eye and skin damage.
• Dette apparatet er ikke beregnet for bruk av personer (inkludert barn) med reduserte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og kunnskap, med mindre de har fått tilsyn eller instruksjoner om bruk av apparatet av en person som er ansvarlig for deres sikkerhet. .
• Ensure all electrical connections are waterproof and protected from moisture. Use a Ground Fault Circuit Interrupter (GFCI) for all electrical outlets connected to pond equipment.
• Do not use the filter if any part is damaged. Contact customer support for replacement parts.
• The filter is designed for pond water filtration only. Do not use with other liquids.

3. Produktkomponenter

The VEVOR CPF-10000 Pressurized Biological Pond Filter includes the following main components:

• Filterhus
• Filter Sponges (Coarse and Fine)
• Bio Balls (Biological Media)
• 13W UV-C Lamp og Quartz Sleeve
• Innløps-/utgangskontakter
• Sewage Exit Connector
• Crank Handle for Cleaning
• Turbidity Indicator
• Strømkabel
• Various Adapters (3/4", 1", 1-1/4", 1-1/2")

Figur 3.1: Internal structure of the VEVOR CPF-10000 filter, highlighting the UV-C lamp, filter sponges, and bio balls.

Figur 3.2: Included accessories and adapters for the VEVOR CPF-10000 filter.

4. Spesifikasjoner

5. Oppsett og installasjon

Proper installation is crucial for the efficient operation of your pond filter. Follow these steps carefully:

1. Plassering: Position the filter on a stable, level surface near your pond. It can be partially buried for aesthetic purposes, ensuring the lid remains accessible for maintenance.
2. Koble til vannpumpe: Connect a suitable water pump (not included) to the filter's inlet. Select an adapter size that matches your pump's outlet hose (3/4", 1", 1-1/4", or 1-1/2"). Ensure a secure, watertight connection.
3. Connect Filtered Water Outlet: Connect a hose from the filter's main outlet back to your pond, ensuring the filtered water returns to the pond effectively.
4. Connect Sewage Exit: Attach a hose to the sewage exit port. This hose will be used to direct dirty water away from the pond during backwashing. Ensure it leads to a suitable drainage area or garden bed.
5. UV-C Lamp Forbindelse: Ensure the UV-C lamp is correctly seated within its quartz sleeve and connected to the power supply. The lamp is pre-installed but check for secure connections.
6. Strømtilkobling: Once all water connections are secure, connect the filter's power cable to a grounded electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.

Figur 5.1: Connection diagram for the VEVOR CPF-10000 filter.

6. Bruksanvisning

6.1 Første oppstart

1. After completing installation, ensure all connections are tight and leak-free.
2. Turn on the water pump to allow water to flow into the filter. Check for any leaks.
3. Plug in the filter's power cord to activate the UV-C lamp.
4. Allow the filter to run continuously for optimal results. Initial water clarification may take 3-7 days depending on pond conditions.

6.2 UV-C Lamp Timerinnstillinger

UV-C lamp features three timing settings to optimize its lifespan and effectiveness:

• AV: UV-C lamp er av.
• 12H Working: UV-C lamp operates for 12 hours daily.
• 24H Working: UV-C lamp operates continuously for 24 hours daily.

Adjust the timer switch on the filter head to select the desired operating mode for the UV-C lamp.

Figur 6.1: UV-C lamp timerinnstillinger.

7. Vedlikehold

Regular maintenance ensures the optimal performance and longevity of your VEVOR pond filter.

7.1 Backwashing (Sponge Cleaning)

The filter features a convenient backwash function to clean the filter sponges without disassembly. Perform backwashing when the turbidity indicator floats up, or regularly as needed (e.g., weekly or bi-weekly depending on pond load).

1. Switch to Sewage Function: Rotate the main switch on the filter head to the "Sewage" position. This diverts the water flow to the sewage exit port.
2. Operate Crank Handle: Turn the crank handle on top of the filter several times. This action agitates the filter sponges, dislodging accumulated debris.
3. Monitor Discharge: Continue turning the crank until the water discharged from the sewage exit runs clear.
4. Return to Filter Function: Once clean, rotate the main switch back to the "Filter" position to resume normal filtration.

Figur 7.1: Backwashing procedure.

Figur 7.2: Turbidity indicator and crank handle for cleaning.

7.2 UV-C Lamp og utskifting av kvartshylse

UV-C lamp has a limited lifespan (typically 8-12 months of continuous use) and should be replaced annually for optimal performance. The quartz sleeve should be cleaned periodically and replaced if damaged.

1. Koble fra strømmen: ALWAYS disconnect the filter from the power supply before attempting to replace the UV-C lamp or clean the quartz sleeve.
2. Open Filter Head: Carefully open the filter head according to the instructions provided in the full product manual (not included here).
3. Fjern Lamp/Sleeve: Gently remove the old UV-C lamp and/or quartz sleeve. Handle the new lamp by its ends to avoid touching the glass.
4. Clean/Install: Clean the quartz sleeve with a soft cloth and a mild cleaning solution if reusing. Install the new UV-C lamp and/or quartz sleeve, ensuring it is properly seated and sealed.
5. Sett sammen igjen: Reassemble the filter head, ensuring all seals are correctly in place to prevent leaks.
6. Koble til strøm igjen: Reconnect power and check for proper operation.

7.3 Filter Sponge Replacement

While backwashing cleans the sponges, they may eventually degrade and require replacement. Replace sponges when they show signs of wear or if backwashing no longer effectively cleans them.

1. Koble fra strømmen: Disconnect the filter from the power supply.
2. Open Filter: Open the filter housing to access the sponges.
3. Fjern og erstatt: Remove the old sponges and insert new ones, ensuring they are correctly layered (coarse then fine).
4. Sett sammen igjen: Close the filter housing securely.
5. Koble til strøm igjen: Reconnect power and resume operation.

8. Feilsøking

9. Garanti og støtte

VEVOR products typically come with a 1-year warranty from the date of purchase. For warranty claims, technical support, or replacement parts, please contact VEVOR customer service. Keep your purchase receipt as proof of purchase.

You can find contact information and further support on the official VEVOR webnettstedet eller gjennom forhandleren din.