GRID BROWS LED Brows Instruction Manual

GRID BROWS LED Brows

FØR DU STARTER

Thank you for your purchase. In this manual we will provide you with the means to get started using your new GRID product!
Similarly used in all forms of real motorsports racing, GRID Brows are a much needed expansion for any dash. With 18 programmable LEDs the possibilities are endless with multiple uses such as spotter info, slip/lock, TC and ABS. (depending on the sim used).

Bryn

Funksjoner

• CFRP enclosures
• 2x 9 RGB LEDs
• RaceDirector compatible

Carbon fiber mounting brackets 

Mounting the brows

To be able to mount the brows, we have included carbon fiber mounting brackets. Here is how we suggest to use them, though you can orient them the way you like to suit your cockpit or preference.
Be sure to use bolt (A8) to fasten the mounting bracket (A3) to a brow (A1). I denne eksample we are mounting the brows and control box to the uprights of a cockpit. Of course you are free to mount them how and where you see fit.
Since the brows are daisy-chained together, the first brow unit in the chain is considered the ‘first’ one, defaults to being the left brow. Therefore it makes sense to mount the control box on the left side of the cockpit. Of course, you are free to install these parts how you like to.
All bolts (A7) and slot-nuts (A9) shown are of the same size/type.

Connecting the brows

As mentioned on the previous page, the brows are daisy chained to each other and to the control box. Provided are two brow cables, a short (A6) and long (A5) one, next to the USB cable (A4). To wire the control box to the first brow in the chain, we recommend using the short cable (A6). The long cable (A5) will connect the two brow modules together.
Attention! Be mindful of the way you connect the modules to each other, always go from an ‘OUT’ to an ‘IN’. For the second brow module, ‘OUT’ can be used to connect a third and fourth module. A maximum of four modules in total is supported.
Both brow modules are identical, it doesn’t matter in which order you connect them to each other or to the control box.

Race Director

• Download and install the lastest version of RaceDirector from  www.sim-lab.eu/srd-setup
• For explanation on how to install and use RaceDirector, please read the manual. This can be found here: www.sim-lab.eu/srd-manual
• Vi vil nå gå gjennom det helt grunnleggende for å komme i gang ved å bruke RaceDirector for å komme deg på sporet så raskt som mulig. Vi oppfordrer deg virkelig til å gå gjennom manualen for en mer inngående forklaring av mulighetene RaceDirector har å tilby.
• Først må vi aktivere produktet, dette gjøres på 'Innstillinger' (1) siden.
• Tick the ‘Activate’ tickbox next to ‘GRID Brows’ (2) and its icon (3) should appear on the left side of the screen. Selecting the icon (3) will take us to its device pages.

Enhetssider

These pages allow you to control, configure and update your device. To keep this manual concise, we only go over the basics or unique functions.

LEDS (A)
All of these options are identical to the LEDs device page for other devices, although there is one additional option which is unique for the Brows and DDU5 V2. The Brows V2 can be daisy chained together, allowing up to 4 brow modules to be connected (1) in total. Please be aware your profiles need to be custom made to suit your needs here. Our default profile is made for the base pair as packaged.
For more information on connectivity, please refer to Page 6 of this manual.

FIRMWARE (B)
On this page you can see the current firmware loaded on the device. If your firmware is out of date, we recommend to update it.RaceDirector holder oversikt over gjeldende fastvareversjoner. Når den oppdager en forskjell, et varsel vil gi deg beskjed om at nyere fastvare er oppdaget. Når en oppdatert fastvareversjon er oppdaget, følg instruksjonene og klikk på knappen «Utfør oppdatering» (1).
RaceDirector will show the progress and will take care of the updating for you. If you see a windows explorer or USB device poppping up, don’t worry, it is part of the process.

Eldre enheter kan fortsatt kreve det tidligere verktøyet for fastvareoppdatering. I så fall vil RaceDirector fortelle deg hva du skal gjøre.

Simhub-støtte

For advanced users, we do still support people who prefer using Simhub. When adding a device, choose the ‘GRID Brows V2’ device.. Endring av LED-funksjonene.
To change the LED effects you need to know their numbering to identify them on the modules. The following schematic shows the LED numbering for treference. Det bør være nok informasjon i den angitte standard LED-proffenfiles for å kunne justere LED-innstillinger etter eget ønske. For å begynne å bygge din egen profffile, foreslår vi at du kopierer en eksisterende og endrer der det er nødvendig. Advanentage er at du alltid har en sikkerhetskopi av standard profile å falle tilbake til.
Merk: for problemer/feilsøking av Simhub profiles, vennligst se Simhub-dokumentasjonen eller Simhub-støtte.

Materialfortegnelse

Mer informasjon

Hvis du fortsatt har noen spørsmål angående montering av dette produktet eller om selve manualen, vennligst kontakt vår supportavdeling. De kan nås på:  support@sim-lab.eu
Alternatively, we have a Discord server where you can hang out or ask for help. www.sim-lab.eu/discord