LIGHTBAUM Adjustable LED Flashlight
SPESIFIKASJON
| Trekk | Detaljer |
|---|---|
| Merke | ErgoActives |
| Produktnavn | LightBaum Adjustable LED Flashlight |
| Modellnummer | A022 |
| Produkttype | Clip-on LED Flashlight (Mobility Aid Accessory) |
| Lyskilde | LED |
| Lysstyrke | ~200 lumen |
| Strømkilde | Batteridrevet |
| Monteringstype | Universal tube clamp |
| Kompatibilitet | Canes, crutches, walkers, wheelchairs |
| Justerbarhet | Flervinkeljusterbart hode |
| Materiale | Slitesterk plast |
| Farge | Svart |
| Installasjon | Tool-free clip-on mounting |
| Bruk | Night walking, path illumination, safety lighting |
| Dimensjoner | ~4.1 × 3.0 × 1.1 tommer |
| Vekt | Lightweight (compact design) |
MONTERINGSTrinn
- 1. Remove the main lighting unit from the cane clip
- Find the arrow mark beside the small window.Turn the battery holder as illustrated, and the stopper willdisappear from the window
- Pull out the battery holder case with light from light hood.
- Separate LED bulb and batteries from the battery holder case as illustrated.
- Push side bar to remove used batteries, and replace with new batteries.
- Place the LED light with new batteries into battery holder and push the unit up to bottom and turn backward until the stopper Is locked into the window securely.
- Slid the LED light unit into clip.
- Push LED light to test lighting function.
- Slid the clip to walking cane and adjust to proper lighting angle.
- If the light does not work property after batteries are changed, please repeat steps 1 to 5 and remove the light unit from battery holder, and use screw driver of pin to push the small steel piece under the most bottom battery, repeat steps 6 to 9 and put the
LED light unit back to light holder, and the light should work property now.
Dokumenter / Ressurser
 | Adjustable LED Flashlight |
Referanser
- Brukerhåndbokmanual.tools
Published: March 25, 2026